Bottle Rocket Fireworks Fin Set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
When I printed this bottle rocket fin set, I found that the opening was 1mm too small for my bottle rockets, which…
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 114
- Wydruki
- 0
- Wyświetlenia
- 707
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
When I printed this bottle rocket fin set, I found that the opening was 1mm too small for my bottle rockets, which measured right at 6mm in diameter. So, to go along with my nose cone, I give you this fin set - with a slightly larger opening. I also increased the thickness of the fins ever so slightly, since the original fins broke when I tried to remove them from the build plate.
! Have fun andNever Forget 1776 !
Print Settings
Printer:
Tevo Tarantula
Supports:
No
Resolution:
0.3
Infill:
100%
Category: Vehicles