1 / 2
Bottle Rocket Fireworks Fin Set
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
When I printed this bottle rocket fin set, I found that the opening was 1mm too small for my bottle rockets, which…
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 114
- Makes
- 0
- Views
- 707
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
When I printed this bottle rocket fin set, I found that the opening was 1mm too small for my bottle rockets, which measured right at 6mm in diameter. So, to go along with my nose cone, I give you this fin set - with a slightly larger opening. I also increased the thickness of the fins ever so slightly, since the original fins broke when I tried to remove them from the build plate.
! Have fun andNever Forget 1776 !
Print Settings
Printer:
Tevo Tarantula
Supports:
No
Resolution:
0.3
Infill:
100%
Category: Vehicles