Pmag Style Dust Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified copy of dust cover for Magpul AR-15 Pmags
- Ocena
- 4,8 / 5
- Polubienia
- 84
- Pobrania
- 812
- Wydruki
- 7
- Wyświetlenia
- 3025
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Printable version of a dust cover for Magpul AR-15 Pmags
Included a .step file if anyone wants to improve it!
I print with it on its side, 100% infill, concentric walls and infill. I use .2 layer height but I think most any will work. Also use tree supports in Cura.
EDIT: I've had a few failures along layer lines since the part is under tension when installed on the mag. It wastes a lot of filament for the supports, but I've found if you print on a 45° angle with the bottom of the cover facing down, it results in a stronger print. I haven't had any layer line failures with this method yet.