1 / 6
ZeroG Mercury 1.1 Nebula Enclosure Filament Entry Corner — zdjęcie 1
1 / 6

ZeroG Mercury 1.1 Nebula Enclosure Filament Entry Corner

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Filament entry corner using an internal ECAS adapter. The Filament path is a little shorter. Boost extruder compat.

Ocena
0 / 5
Polubienia
3
Pobrania
7
Wydruki
0
Wyświetlenia
159
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a modification of the ZeroG Mercury 1.1 Nebula enclosure.  I was having some difficulty with consistent filament extrusion which I think boiled down to the filament path that the corner was using.  

This uses a straight through path, with an ECAS Adapter on the inside. to lock the bowden tube at an exact length and angle.  

I also designed a modified one to mount an HGX-Lite extruder like this: https://www.amazon.com/dp/B0BDLB4NHV for purposes of fast loading filament  and decreasing overall filament tension in the system. 

Hardware Needed:

All existing nebula corner hardware (2 M3 and 1 M5 screw)

1 ECAS

For HGX version: 

4 Voron-Style Heat Set Inserts

4 M3x8-12mm screws

Additional Extruder Mounts can be made upon request.

Macros for fast loading below, unloading to follow:

Print Settings:

PLA might be fine, but I printed mine out of ASA like the rest of the parts on my printer, using ZeroG print settings, but with Auto Supports (non-tree) enabled.  Tree would probably be fine.

Tagi