1 / 6
ZeroG Mercury 1.1 Nebula Enclosure Filament Entry Corner — image 1
1 / 6

ZeroG Mercury 1.1 Nebula Enclosure Filament Entry Corner

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Filament entry corner using an internal ECAS adapter. The Filament path is a little shorter. Boost extruder compat.

Rating
0 / 5
Likes
3
Downloads
7
Makes
0
Views
159
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a modification of the ZeroG Mercury 1.1 Nebula enclosure.  I was having some difficulty with consistent filament extrusion which I think boiled down to the filament path that the corner was using.  

This uses a straight through path, with an ECAS Adapter on the inside. to lock the bowden tube at an exact length and angle.  

I also designed a modified one to mount an HGX-Lite extruder like this: https://www.amazon.com/dp/B0BDLB4NHV for purposes of fast loading filament  and decreasing overall filament tension in the system. 

Hardware Needed:

All existing nebula corner hardware (2 M3 and 1 M5 screw)

1 ECAS

For HGX version: 

4 Voron-Style Heat Set Inserts

4 M3x8-12mm screws

Additional Extruder Mounts can be made upon request.

Macros for fast loading below, unloading to follow:

Print Settings:

PLA might be fine, but I printed mine out of ASA like the rest of the parts on my printer, using ZeroG print settings, but with Auto Supports (non-tree) enabled.  Tree would probably be fine.

Tags