1 / 13
Tukkari filter housing for HEPA and active carbon with 12 cm fan — zdjęcie 1
1 / 13

Tukkari filter housing for HEPA and active carbon with 12 cm fan

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Filter housing for a Tukkari enclosure.

Ocena
0 / 5
Polubienia
1
Pobrania
6
Wydruki
0
Wyświetlenia
78
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

A filter for a Tukkari enclosure

I believe the specific enclosure I have is designed for a Prusa Mk3 printer. There seem to be several designs with or without a filter. My enclosure has a filter in the back panel for which I made this replacement filter. I couln't find the replacement filters from Tukkari and already have HEPA and active carbon pellets at hand so designed a multi part filter housing. 

This filter is meant to be a sandwich of a carbon filter, 12 cm fan and a hepa filter. To make the whole filter assembly you need:

Printed parts:

(Version 15). Watch carefull which part is in which file.

  1. One "empty" casing half (12 in the file name)

  2. One honeycomb casing half (15 in the file name)

  3. Flat grill

BOM (Bill Of Materials)

  1. 3D printed parts

  2. 12 cm fan (optional: with speed control)

  3. 4 x M4 bolts 50mm (length depends on your enclosure)

  4. HEPA filter material (https://nl.aliexpress.com/item/1005002482992879.html?spm=a2g0o.order_list.order_list_main.90.3cf31802q8xTDL&gatewayAdapt=glo2nld)

  5. Active carbon pellets (I use aquarium filter pellets)

There is a flat grill plate which fits behind the honeycomb to prevent the pellets falling out. My pellets are 1,3 mm in diameter and the slots in the grill are 1 mm wide.

Construction on order from 1 to...

  1. Honeycomb filter half filled with carbon pellets

  2. Flat grill on the honey comb

  3. 12 cm fan

  4. Empty casing with HEPA filter material inside

  5. M4 bolt through the three parts

  6. Place whole filter in hole in the enclosure

  7. Bolt the whole assembly into the enclosure

Please report enhancements if you find them.

Notes:

  1. The surface didn't print very nice on the halves. 

  2. The carbon filter on the photo's is a prototype still with square corners. The printable files have rounded corners. Didn't want to waste more orange Prusament as I have a functional part.

Tagi