79 modeli
Modification for Tukkari TLX (Prusa Mini) enclosure, stops the rear extractor fan from touching any walls, giving space for the fan to work and not be obstructed. Print Settings Printer Brand: Prusa Printer: Mini Rafts: No Supports: No…
Version2: This is a remix of my previous Tukkari TS vent to PSU shroud duct ( https://www.thingiverse.com/thing:4738537 ), this time its adustable so if you have a paver in the enclosure, the part still provides full performance for…
I found out that an enclosure isn't only good for printing ABS / ASA or protecting the printer from dust, but it also can be used to organize things you need for 3D printing. I used the sides of the Tukkari TLX enclosure to attach…
It's a simple holder for a cheap round hygrometer with 2 magnets (10 x 3 mm). Like this hygrometer:…
Led rails for tukkari case of Prusa MK3s The file "LED Rail.stl" can be modified in lenght for your case. Link for LED: https://amzn.to/3ub1vkx
Materials and specifications: PETG or ASA/ABS reccomended; 0,2 layer height; 5 perimeters/shells; 120mm fan ( personally I used this https://amzn.eu/d/gUrk2gO plugged into an octopi ); 4 M4x40 hex screws; Assembly Mount a 120 mm fan…
I have bought the beautiful Tukkari enclosure and wanted to re-use my existing 92mm Noctua fans from my lack-enclosure. So here is an adapter that fits perfectly to the Tukkari enclosure. You can use some of your 3M screws with a nut to…
Printed in PLA, 0.3 draft. Grind the inner edges for your desired fit (loose or tight).
Remix des Models von grooveup um den Halter seitlich am Tukkari Gehäuse TF Acrylic zu befestigen
The filament roll never ran cleanly directly on the ball bearings of the filament holder of my Tukkari TF housing. That's why I printed these simple filament roll guides. They fit on the ball bearings of the Tukkari reel holder. I printed…
Blende für den Filamentladespalt des Tukkari TS Druckergehäuses.
This cover makes it possible to place the Tukkari case very close to a wall and still be able to use the ventilation. The cover is designed for the use of an inside mounted fan. The profile of the air deflector as well as the spacers is…
The stoppers will fit any 4mm thickness enclosure. They are fixed to the desk with two 3,5*200 auto taping screws each. All the measures are in the last picture. Printed with PETG, 0,15mm layer, 5 perimeters, 20 upper & lower monotonic…
With this holder a simple LED profile can be mounted simply and inconspicuously in the Tukkari TLX enclosure. The cable is passed out the bottom of the holder and can be routed along the edge in the TLX enclosure. Material I use a black…
The Tukkari TS enclosures are missing a thermometer/hygrometer mount like the TF enclosures, so I designed this bracket from the Tukkari STEP files to require no additional holes. This bracket should work on any of the Tukkari TS…
I created this PSU shroud in Fusion 360. I was inspired by Colin Hill from the UK, but I wanted a shroud without the fan option and also a barrier that stops the shroud from moving down, by using the top of the PSU to stop it. I printed…
Ich nutze den Drucker mit MMU in einem Tukkari Enclose. Für die fünf Filamente der MMU sind Durchgänge vorhanden. Da ich aber für bestimmte Drucke (z.B. TPU) die MMU ausschalte und den Bypass der MMU nutze, brauche ich eine weitere…
Keeps the two separate spool roll filament holders together
Heyho This is a Slider I designed for my TUKKARI Enclosure. I had quite some problems with my enclosure because the Z Calibration (& Homing) failed each time with my MK4 when also using PTFE tubes to the printer directly. The tubes always…
Die Temperatur im Tukkari liegt bei PLA und PETG eigentlich immer unter 40°. Auch das Netzteil war bisher maximal handwarm. Trotzdem habe ich einen 40mm USB-Lüfter angebracht, um bei höheren Temperaturen die PSU zusätzlich kühlen zu…
Tapo C200 C210 C220 mount for the tukkari enclosure. Technicaly I've used https://www.printables.com/model/441856-tp-link-tapo-cam-c225-or-c200-wall-mount-screw, but Printables doesn't allow this due to licence issues which I don't…
Remix of the "Universal Spool Holder" by butchja (https://www.thingiverse.com/thing:2070272) to fit the Tukkari TLX enclosure (replacement of stock 10 mm spool rod) Parts: M8 threaded rod (134 mm length) 2x M8 self locking nut 2x skate…
This is a small sliding clip to mount a PTFE connector to the Tukkari TF enclosure. I use it as an inlet for a PTFE tube connecting my eSUN eBox dryer. PLA+ works good for this print, slides nicely without grabbing the acrylic. Print the…
A matching filament spool holder belongs to the noble Tukkari case. However, the 1 kg Tukkari holder has a definite disadvantage in my eyes. The very thin shaft is not on bearings, so it happens quickly that the spool shakes when it is…
I've had the issue that i had not enough temp in my tukkari-Case, beause i'm printing in a room with 16 degree. For printing ABS I wanted to have at least 40 degree, with the heater I have now 40 degree in 7 minutes. So i designed a…
For my Tukkari TS model Prusa enclosure I created this camera mount to place my Logitech C270 webcam in the middle above the door, inside the enclodure with a clear view of the print bed. I printed in 0.2 layer height, 25% infill and no…
Griff für die TUKKARI Einhausung Ankermake M5
Tukkari PSU 40mm Fan am besten in Kombination mit Prusa PSU Cover https://www.printables.com/de/model/393140-prusa-psu-cover-black-version
Used to hold an ESP8266 and DHT thermal sensor to the top of a Tukkari mini enclosure. Attaches to the fan screw without any need to change the screw. The ESP8266 is NOT held down and is in place only by the top of the enclosure (I didn't…
After adding a 2" tall concrete block to reduce vibration while printing (which works great BTW), my printer sat higher than before. Due to this, the power supply unit (PSU) was above the cut out of my Tukkari enclosure, and some cool air…
I love my Tukkari TLX case for my MK3S+, but I hate the filament spool holder, the small one, which is usable for 1 kg spools. The axis is way too thin which generates ugly noises when the spool unwinds and puts very much tension on the…
Modified version of the mount from Sulli18
I've created some usefull addons for the Tukkari Enclosure for the Creality CR-6 SE (this one: https://www.tukkari.eu/p/tukkari-tf-creality-cr6-se-enclosure-box-with-combined-air-filter ) The bottomplates I've designed this for a better…
This was designed to hold the original metal plate so the G2H snaps magnetically on it.
Corner bracket to replace the standard component from Tukkari in the front left top corner. Elements of the articulated arm can be mounted to the bracket to provide a top down view onto the print bed with the ESP32 camera. The bracket can…
This is a weight bearing support for a Tukkari TF enclosure. If you use only 1kg filament spools you don't need it. If, however, you use 2kg or heavier spools placed on top of the enclosure the enclosure clearly bends. Fortunately the…
Da ich plane die Lüfter in dem Druckergehäuse smart zu machen, habe ich die Temperatur/Luftfeuchtigkeits Anzeige gegen einen Zigbee Sensor getauscht. Ich habe einen Nous E6 Temperatur Sensor. Um diesen im Gehäuse zu befestigen habe ich…
The original model was a little high for me so I combined it with Tukkari's magnetic door bracket. Should be able to use the magnets and cover from the original bracket. Example output from a C920 included to give you an in idea of the…
Spool holder with integrated bearings for the Tukkari TLX enclosure. It is a better alternative to the original rod which has to much resistance and may lead to z axis calibration errors. IMPORTANT : Set two print pause's at 11.7 and…
I wanted to have a steelbed holder outside of the enclosure, so I've created a holder for Mini Steelbed mounted includind the feet. It has an extra holder so no extra holes would be needed. Won't fit in the mini to print. :( Printed…
Is it bulky? Yes! Does it have unnecessary space? Yes! Do the screw holes do not line up with the ESP? YES! Well, bulky and much space was on purpose - the idea was that maybe in the future I wanted to add more boards... The screw holes…
Mirror the parts for the other side! I deliberately did not model the clips for the MITTLED because they are awful to print. I used a 40cm stripe for the top and two 30cm stripes for the sides.
Work in progress. Having a Tukkari enclosure for my Prusa Mini printer I wanted a filter housing for HEPA and charcoal pellets. Please note: 1) The stl of the charcoal pellet "infill" insert is angled. This way I was able to allign the…
Mirror the parts for the other side! I deliberately did not model the clips for the MITTLED because they are awful to print. I used a 40cm stripe for the top and two 30cm stripes for the sides.
Work in progress. Having a Tukkari enclosure for my Prusa Mini printer I wanted a filter housing for HEPA and charcoal pellets. Please note: 1) The stl of the charcoal pellet "infill" insert is angled. This way I was able to allign the…
Heyho This is a Slider I designed for my TUKKARI Enclosure. I had quite some problems with my enclosure because the Z Calibration (& Homing) failed each time with my MK4 when also using PTFE tubes to the printer directly. The tubes always…
A filter for a Tukkari enclosure I believe the specific enclosure I have is designed for a Prusa Mk3 printer. There seem to be several designs with or without a filter. My enclosure has a filter in the back panel for which I made this…
Tukkari Holder without drilling and gluing. The Holder is divided into two parts, the adapter for mounting within the Tukkari enclosure and the LED Profile Adapter. You need: 2 x M4 square nut 2 x M4 screw 4 x M3 countersunk screw 4 x M3…
Spacers for the Tukkari spool rollers to keep them aligned and evenly spaced. This is a remix of the roll spacer by Lord_Syrus , with adjusted width to accommodate smaller spools like the plastic Sunlu and others (still works for the…
Provides the ability to mount the Prusa Mini PSU onto the exterior of the Tukkari TLX case. I kept the design with ease of printing in mind, so use of two zip ties are required to mount the PSU to the bracket. Use the existing case screws…
Printing materials like ASA forced me to install a filter on my tukkari enclosure. Missing a model for any stock air filter, I designed it by my self. You also need m3 nuts an screws to mount it on a fan or enclosure.
Keeps foreign object from falling down to print bed, acts as a filament guide, and helps create negative pressure within the case while an exhaust fan is running. There is a little endplay in the slot to allow for the filament to be able…
Simple stopper for Tukkari enclosure box. I recommend use if your box stand on smooth surface. Stopper is fixated with double tape on surface.
A simple remix of the Plate mounting bracket for 7" touchscreen case so it can be mounted on top of the Tukkari Printer enclosure. I printed it with Polyterra PLA and it works pretty good. No special settings needed.
I wanted a fan in my tukkari enclosure which blows cool air directly into the ventilation slots of the power supply of my MK3S+. Mounted with snap in.
I designed this two piece intake manifold to suck hot air at the top of the enclosure out of the Tukkari TLX MINI enclosure. It clears the PRUSA MINI and should in theory prevent that you get strong drafts when using the fan. The fan is…
Got inspired of Thomas fan case, but I wanted one on the outside of my Tukkari TS Acrylic enclousure.
I like the adjustable camera holder, especially as I was not satisfied with the focus of the C270 while mounted to the Z axe. So I modified the slider so that it fits into the corner of my enclosure using 3M double sided assembly tape.
Original part for Tukkari TS Acrylic Enclosure . The holder has no contact with the door. PETG, 3 perimeters, 20prc infill, no suppors. License is the same like original files.
Covers the slot in the top face of the Tukkari TLX MK3S+MMU2S enclosure, allowing one of the MMU2S feeds to be accessed from the top of the enclosure. I have a dry box holding the four filaments which I use most often, and I use the 5th…
The enlarged feet allow the enclosure to hang slightly off the edge of your desk, saving space while maintaining stability. This modification is perfect for those with limited desk space, as it helps to optimize your workspace without…
The model just holds to the bolt head, which prevents it from sliding inadvertently.
I wanted to plug the 5 holes of the Tukkari TLX enclosure. This ensures (along with other mods) a more air tight enclosure when printing ASA and ABS or, other, harmful material. Printed in TPU for a flexible piece with a press fit that…
A simple PTFE guide/holder for a Tukkari enclosure. Needs an M4 screw that is slightly longer than what comes with the enclosure.
Extra Prusa PSU cooling for Tukkari TS enclosure. The Tukkari TS enclosure for Prusa Mk3s does not include a PSU shroud between the PSU and honeycombe vent side panel. This accessory in PETG provides a bolt on shroud to direct cool…
I liked tg73's design, but needed a solid termination for a Bowden tube. In doing so, I had to add bolts and a bottom plate to secure the slot cover. Required Hardware: 4x M3x12 Socket Hex Head Cap Screw 4x M3 nuts (imbedded) 1x PC4-M10…
only modded the bottom part added holes for the M3 nuts to be inserted after print is completed widened the bottom to increase it's overall footprint (thought it would be helpful as it felt a bit thin)
Remix of Colin Hills Design (@Colin) for the new Version of the Tukkari TLX V2 has two cable slots for the noctua
I wanted to use the original mounting on the TLX cover, so I adapted the original design so that a vertical shift could also be made on the original parts of the TLX cover. At the same time, I increased the space for the fan to 50 x 50 x…
The Tukkari TLX enclosure has a vent that directs fresh air at the power supply. If you have relocated the PSU to outside the enclosure, this vent is redundant. This flap covers the vent, sealing the heat in the enclosure. It is a…
The printer enclosure from Tukkari TS is simple and inexpensive. It is equipped with a ventilation hole with a cover. Unfortunately the cap is difficult to remove, so I invented a sliding cap. When I print PLA material I open the cap,…
For the Tukkari TF box model, a cable clip is available only for the center fasteners. I have therefore created a corner leg for the Tukkari TS box, complete with the cable clips from the Tukkari TF model. K modelu boxu Tukkari TF je k…
I customized the Filler Spool Holder to fit it on the Tukkari Case for Prusa Mini. All parts do not need any support. Printed all parts with 30% Gyroid with Perimeters of 4. You need: 608 skate bearings e.g.…
This is my Enclosure system for the Tukkari TS enclosures (should fit the MINI or MK3 versions). I included zip tie holes in many locations to keep things as tidy as possible. All original design files included as STEP so ready to remix.…
I've been thinking for a long time about how I'm going to mount my new Mintion Beagle camera into the Tukkari box. All the models of holders that would have been considered were unsuitable for this application, plus they required the use…
This is a two-part bracket (for easy printability) for securely mounting a SUNLU S1 Plus filament dryer on top of a TUKKARI TLX Prusa MK3/MK4 enclosure. I used to just set the dryer directly on top of the enclosure, but it would always…
I specifically designed this for the Tukkari TLX MMU Prusa MK3/MK4 enclosure with a built in mount for the Unifi G3 Instant Camera. The only additional hardware required is 3x M4 hex nuts that need to be inserted, the original Tukkari…
The Tukkari TLX Enclosure Risers are specifically designed to increase the height of the 3D printer enclosure. After adding a concrete slab and a foam pad to reduce noise levels from 3D printing, the printer may end up too close to the…
