1 / 3
Tukkari PSU shroud for the Prusa Mk3s+
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I created this PSU shroud in Fusion 360. I was inspired by Colin Hill from the UK, but I wanted a shroud without the fan
- Ocena
- 4 / 5
- Polubienia
- 3
- Pobrania
- 40
- Wydruki
- 1
- Wyświetlenia
- 479
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (0)Kolekcje (13)Powiązane
I created this PSU shroud in Fusion 360. I was inspired by Colin Hill from the UK, but I wanted a shroud without the fan option and also a barrier that stops the shroud from moving down, by using the top of the PSU to stop it.
I printed it in PETG on 0.3 resolution with 2 perimiters and 25% infill. 4 top and 3 bottom layers.
Print Settings
Printer brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.3
Infill:
25
Filament brand:
eSUN
Filament material:
PETG