1 / 3
TUKKARI TLX Prusa MK3/MK4 Enclosure SUNLU S1 Plus Filament Dryer Mount — zdjęcie 1
1 / 3

TUKKARI TLX Prusa MK3/MK4 Enclosure SUNLU S1 Plus Filament Dryer Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A support bracket for securely mounting the SUNLU S1 Plus dryer on top of the TUKKARI TLX Prusa MK3/MK4 Enclosure.

Ocena
0 / 5
Polubienia
8
Pobrania
23
Wydruki
0
Wyświetlenia
1068
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This is a two-part bracket (for easy printability) for securely mounting a SUNLU S1 Plus filament dryer on top of a TUKKARI TLX Prusa MK3/MK4 enclosure.  I used to just set the dryer directly on top of the enclosure, but it would always walk around and get pulled forward.  

Note that I ordered the enclosure with the “Fixed filament holder for spools up to 1 kg”, and my bracket is designed to fit into the slots that originally held this, if you have an enclosure with a different spool holder then it may not work.  

The large piece is too big to print on my Prusa MK4, so I printed it on a large bed printer instead (artillery sidewinder x2).  Use two M3 or 4-40 flathead machine screws ~½" long to join the two pieces.  

I'm also using this PTFE tube guide with my dryer:

https://www.printables.com/model/129999-sunlu-s1-filament-dryer-m10-ptfe-guide

Tagi