1 / 2
Fan Duct for Tukkari TF Acrylic Enclosure - 120mm Fan to 100mm Pipe adaptor
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A pipe adaptor for the 120mm Fan + Filter combo for the Tukkari TF Acrylic enclosure.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 701
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (20)Powiązane
Materials and specifications:
- PETG or ASA/ABS reccomended;
- 0,2 layer height;
- 5 perimeters/shells;
- 120mm fan (personally I used this https://amzn.eu/d/gUrk2gO plugged into an octopi);
- 4 M4x40 hex screws;
Assembly
Mount a 120 mm fan sandwiched between the fan duct and the hepa filter included with the Tukkari TF enclosure in a pull configuration, be sure the air is drawn out and not pushed inside the enclosure.
Test the system by lighting and blowing out a small candle near the fan.
You can either print the fan and duct already as one or separately.