1 / 2
Fan Duct for Tukkari TF Acrylic Enclosure - 120mm Fan to 100mm Pipe adaptor
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A pipe adaptor for the 120mm Fan + Filter combo for the Tukkari TF Acrylic enclosure.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 68
- Makes
- 0
- Views
- 701
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Materials and specifications:
- PETG or ASA/ABS reccomended;
- 0,2 layer height;
- 5 perimeters/shells;
- 120mm fan (personally I used this https://amzn.eu/d/gUrk2gO plugged into an octopi);
- 4 M4x40 hex screws;
Assembly
Mount a 120 mm fan sandwiched between the fan duct and the hepa filter included with the Tukkari TF enclosure in a pull configuration, be sure the air is drawn out and not pushed inside the enclosure.
Test the system by lighting and blowing out a small candle near the fan.
You can either print the fan and duct already as one or separately.