Tukkari TS Enclosure Thermometer/Hygrometer Corner Brackets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Tukkari TS enclosures are missing a thermometer/hygrometer mount like the TF enclosures, so I designed this bracket!
- Ocena
- 4,5 / 5
- Polubienia
- 7
- Pobrania
- 42
- Wydruki
- 3
- Wyświetlenia
- 512
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Tukkari TS enclosures are missing a thermometer/hygrometer mount like the TF enclosures, so I designed this bracket from the Tukkari STEP files to require no additional holes.
This bracket should work on any of the Tukkari TS enclosures. It comes in both a left and right version, depending on where you'd like the bracket to be located. The print does not require any supports and should be printed in the default orientation. It should be printed in PETG/ABS/ASA and I recommend using enough bottom/top layers and walls to effectively print it without infill.
The shim piece is to allow support-less printing while still giving the front bezel of the thermometer/hygrometer a place to be. It should be placed in front of the corner bracket when mounting.
Thermometers/Hygrometers were purchased from Amazon here. I recommend setting them all in a box and discarding any which don't match the others after a few hours.
I hope it helps you out! Please feel free to modify the included source files if they help you.