1 / 6
Prusa PSU cooling for Tukkari TLX enclosure
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to use the original mounting on the TLX cover, so I adapted the original design so that a vertical shift could
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 338
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (12)Powiązane
I wanted to use the original mounting on the TLX cover, so I adapted the original design so that a vertical shift could also be made on the original parts of the TLX cover. At the same time, I increased the space for the fan to 50 x 50 x 10 mm. The print was done with white transparent PETG to follow the cover concept.
Category: 3D Printer Accessories
