1 / 2
Tukkari Prusa Enclosure Top Slot Cover — zdjęcie 1
1 / 2

Tukkari Prusa Enclosure Top Slot Cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Keeps foreign object from falling down to print bed, acts as a filament guide, and helps create negative pressure.

Ocena
5 / 5
Polubienia
11
Pobrania
62
Wydruki
1
Wyświetlenia
475
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Keeps foreign object from falling down to print bed, acts as a filament guide, and helps create negative pressure within the case while an exhaust fan is running. 

There is a little endplay in the slot to allow for the filament to be able to move slightly without it getting caught up.

The filament hole is 3.50mm inner diameter.

Print for the cover itself, print with supports only at the filament hole. You can either paint on supports or use Smart Fill. For the inserts, print 2. Then you can super glue these together and add to your enclosure!

Tagi