Tukkari Prusa Enclosure Top Slot Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Keeps foreign object from falling down to print bed, acts as a filament guide, and helps create negative pressure.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 62
- Makes
- 1
- Views
- 475
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Keeps foreign object from falling down to print bed, acts as a filament guide, and helps create negative pressure within the case while an exhaust fan is running.
There is a little endplay in the slot to allow for the filament to be able to move slightly without it getting caught up.
The filament hole is 3.50mm inner diameter.
Print for the cover itself, print with supports only at the filament hole. You can either paint on supports or use Smart Fill. For the inserts, print 2. Then you can super glue these together and add to your enclosure!