Millennium Falcon Fob Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Millennium Falcon RFID fob housing for the HID Proximity 1346 ProxKey III or similar size RFID fobs
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 145
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Inspired by the Millennium Falcon RFID fob housing by Stephen Sealey
I merged the top and bottom parts with the middle section, then split it in half.
Small 2 mm holes were added for pins inserts. You can use 14 AWG wire or 1.75 mm filament.
The back of the middle section was cut, removed, and separated so a different color and material can be used.
For mine, the body is Overture Matte Gray PLA and eSun Translucent Orange PETG
If you do not have a fob, a CR2032 battery could be used with flickering yellow 3 mm LEDs, and the effect is amazing. 4 LEDs in total are a perfect idea.
Several files are included for different approaches, or projects
Millennium Falcon Original Design by Glitch