Millennium Falcon Fob Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Millennium Falcon RFID fob housing for the HID Proximity 1346 ProxKey III or similar size RFID fobs
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 17
- Makes
- 0
- Views
- 145
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Inspired by the Millennium Falcon RFID fob housing by Stephen Sealey
I merged the top and bottom parts with the middle section, then split it in half.
Small 2 mm holes were added for pins inserts. You can use 14 AWG wire or 1.75 mm filament.
The back of the middle section was cut, removed, and separated so a different color and material can be used.
For mine, the body is Overture Matte Gray PLA and eSun Translucent Orange PETG
If you do not have a fob, a CR2032 battery could be used with flickering yellow 3 mm LEDs, and the effect is amazing. 4 LEDs in total are a perfect idea.
Several files are included for different approaches, or projects
Millennium Falcon Original Design by Glitch