Adventure Force Boxer Pro Repair Kit Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This kit aims to fix jams and pusher wheel wearing out.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 300
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
Change Log 10th May 2026:
Updated Dart Softener to be slightly smaller diameter than darts, to use
1. Boil hot water
2. Put 2 short darts in hot water
3. Put them into each end of the dart softener
4. Wait 30 seconds before removing darts
5. Repeat as desired
Change Log 2nd May 2026:
Added a dart softener part, where u insert the dart in and it will become squishy and smaller in diameter, reducing friction between belt and dart and allowing for more smooth firing
Change log 1st May 2026:
Rescaled the spacers to 3.75mm height so there should be no need for cutting darts by 1-3mm
Having jams in your Boxer Pro? Darts not being launched before the next belt is pushed? Fret not! I got you covered!
The wheel spacer is to be attached on the circle before the rubber wheel is to be fitted on it
The belt spacer is to be pushed all the way till the end of each belt
Using worn out darts decrease friction between belt and dart and will increase the chance of darts firing than stock fresh and firm darts