Filament Holder for BIQU Panda Station (Refill or Spool)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament Refill Holder for BIQU Panda Station
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 238
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Filament Spool or Refill Holder for the BIQU Panda Station
UPDATE JULY 2026 : Now holds either a Refill or Spool V7
Recently got a couple of Panda Stations from BIQU and printed their filament holders for the drawers in the cabinet, which are fine for the filament on spools, but I wanted to hide away the refill filament too and they wouldn't fit on their holders. (I know I could have left them in their boxes), so I designed this simple holder that you can screw into the slide out cabinet drawers using a couple of M3 x 10mm screws.
( you could use longer or maybe 8mm would work too.)
I used 3 walls and 15% rectilinear infill - No Supports required. I printed in PLA but PETG may be better, I'll see how they last.