Bambu Lab AMS HT - Skadis Mount - Hook Version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hook-based SKÅDIS mount for Bambu Lab AMS HT. P2S riser compatible. Split and single-piece profiles included.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 200
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of damole19's excellent BambuLab AMS HT IKEA SKADIS Mount with T-Clip. Big thanks to damole19 for sharing the original model and making this remix possible!
The original design uses T-clips that you insert into slots and rotate to lock. However, on my Bambu Lab P2S with a riser, the top only has oval slots and no open space at the back — making it physically impossible to rotate the T-clips into position. So I had no choice but to redesign the mounting mechanism entirely.
What changed: The slot + T-clip system has been replaced with hooks. You simply slide the mount into the SKÅDIS board and thats it!
Compatibility:
Bambu Lab AMS HT
IKEA SKÅDIS pegboard
Tested on Bambu Lab P2S with riser (oval slots only / no rear clearance)
Should also work on setups where T-clips are accessible, as a simpler alternative
Print settings:
Material: PETG
Wall loops: 5
Sparse infill density: 20% (Gyroid)
Supports: Yes — required for hooks
This is my P2S-Riser.
If this mount saved you the same headache it saved me, consider leaving a like, adding it to your collections, or sharing a make — it helps a lot! 🙏