Cowling and Spinner for Tower Hobbies Phoenix Model Sonic Mk2 Low-Wing RC Plane
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cowling for the Tower Hobbies Phoenix Model Sonic Mk2 Low-Wing
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 133
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Cowling for the Tower Hobbies Phoenix Model Sonic Mk2 Low-Wing
The cowling should slide right over the nose of the plane. Attach it with 4 screws of your choice. Arguably I could have cut off the part of the fuselage that extends along the side of the motor and made this a little more streamline. However, I didn't want to alter the fuse, and this seems like the right look for the plane.
I didn't have space inside the cowling area for the ESC, so I lay it on top of the battery inside the fuselage. I have a small notch for cooling air on the left side of the cowling, by the spinner. You might want to open up a hole in the back of the fuselage to encourage airflow.
The spinner is a scaled up (to 55mm) version of [Simple Print] 40mm Spinner for RC Airplane by AeroMartin. Thank you AeroMartin.