Cowling and Spinner for Tower Hobbies Phoenix Model Sonic Mk2 Low-Wing RC Plane
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cowling for the Tower Hobbies Phoenix Model Sonic Mk2 Low-Wing
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 29
- Makes
- 0
- Views
- 130
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Cowling for the Tower Hobbies Phoenix Model Sonic Mk2 Low-Wing
The cowling should slide right over the nose of the plane. Attach it with 4 screws of your choice. Arguably I could have cut off the part of the fuselage that extends along the side of the motor and made this a little more streamline. However, I didn't want to alter the fuse, and this seems like the right look for the plane.
I didn't have space inside the cowling area for the ESC, so I lay it on top of the battery inside the fuselage. I have a small notch for cooling air on the left side of the cowling, by the spinner. You might want to open up a hole in the back of the fuselage to encourage airflow.
The spinner is a scaled up (to 55mm) version of [Simple Print] 40mm Spinner for RC Airplane by AeroMartin. Thank you AeroMartin.