1 / 4
Watering Can Nozzle
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replace that clogged or missing watering can nozzle
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Same design as the original, except I modified the threads to work with my watering can.
My threads were very flat and shallow. The D (maj) was 23mm, and the D (min) was 22mm. The threads were spaced 6mm apart. The thread profile was a 3mm wide, low half-circle, and the area in between was flat. (See photo) Perhaps the threads had been crushed by the original nozzle.