1 / 4
Watering Can Nozzle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replace that clogged or missing watering can nozzle
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 38
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Same design as the original, except I modified the threads to work with my watering can.
My threads were very flat and shallow. The D (maj) was 23mm, and the D (min) was 22mm. The threads were spaced 6mm apart. The thread profile was a 3mm wide, low half-circle, and the area in between was flat. (See photo) Perhaps the threads had been crushed by the original nozzle.