Top hinge cover for VHS brand PVC windows
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Covers for the basic top hinges of a specific PVC windows brand (VHS).
- Ocena
- 4 / 5
- Polubienia
- 6
- Pobrania
- 19
- Wydruki
- 1
- Wyświetlenia
- 111
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
What?
These are covers for the top hinges of VHS brand PVC windows. My windows only open on the traditional way, so I'm not sure if these would fit with a tilt-and-turn VHS window.
Why?
Due to sun exposure, paint and scratches most of the hinge covers of my windows are either yellow, painted, broken or everything at the same time. After some time with no luck searching for a replacement I decided to try luck and design them by myself.
I've designed two covers:
A long semi-cylindrical cover for the central bit of the hinge. Is slim (a single line with a 0.4 nozzle) and flexible enough to be insterted and removed without issues.
A long outside cover for the rest of the hinge. As there shouldn't be much need for removal the fit is strong so it doesn't fall.
Need to know:
They're as functional as the default ones, but my windows don't have the tilt and turn hinge (that opens only at the top), only the normal window opening mechanism, so I'm not sure if this cover will be compatible with a similar window with that mechanism.
I've found less issues in the print by object mode (instead of print by layer). I've found is less probable to have issues with the thin central piece if the nozzle doesn't move back and forward too much.
Check the model for the bottom hinges: Bottom hinge cover for VHS brand PVC windows