Tower funnel - Modular rotating hydroponics tower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Water input and output colector for rotating tower.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 174
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
This funnel collects the water that drips from the rotating tower. The water can return to the sump. For the tower to be able to swivel the water hose has to pass under the tower. Therefore a double hose adapter is in the funnel wall. See pictures.
It is an extension on the modular hydroponics tower from Blove.
Please note:
The designed support between the funnel and the hose inlet has to be cut away after printing.
The tree support in the 'SLICED' file is needed, otherwise the hose barb might fall over during printing.
I usually print it from PLA, it is strong enough and does not get a lot of sun/uv under the tower.