HAC-2 joystick Fusion 360 remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fusion 360 remix of electronoora's HAC-2 joystick. Edge rounding more TAC-2 like, using thread inserts, etc.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 65
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Share Alike
BOM:
1x Industrias Lorenzo P/SM-30 joystick assembly
4x microswitches (if joystick assembly did not come with them, mine did)
2x Seimitsu PS-14-DN arcade buttons
Factory made joystick cable (can be sourced e.g. from Aliexpress) OR wireless module
3x M3 thread insert M3xD4.2xL4.0+
1x M4 thread insert M4xD6.0xL4.0+
2x countersunk M3X16(...24)
1x countersunk M3x8(...14)
1x countersunk M4x14(...20)
2x countersunk M4x16(+), washers and nuts
Optional:
JST 1.25 male and female connectors to make it easier to assemble and switch cables / wireless modules or whatnot
Wireless version:
There is now (2026-11-04) space to fit in small wireless module of ~size CR2032 (I will ask later if guy who I bought these from allows linking to his site).
Spring in P/SM-30 was quite stiff for my tastes. It is about 13x35x1 mm (od, length, wire size) spring so I guess you could source one made out of thinner wire. I did cut ~5mm off from top and that worked too but it could be still a bit less stiff (matter of taste of course).