1 / 3
HAC-2 joystick Fusion 360 remix — image 1
1 / 3

HAC-2 joystick Fusion 360 remix

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Fusion 360 remix of electronoora's HAC-2 joystick. Edge rounding more TAC-2 like, using thread inserts, etc.

Rating
0 / 5
Likes
1
Downloads
3
Makes
0
Views
65
Reviews
0

Updated at source:

Model information

Category
Video Games
License
Creative Commons — Attribution — Share Alike

BOM:

  • 1x Industrias Lorenzo P/SM-30 joystick assembly 

  • 4x microswitches (if joystick assembly did not come with them, mine did) 

  • 2x Seimitsu PS-14-DN arcade buttons

  • Factory made joystick cable (can be sourced e.g. from Aliexpress) OR wireless module

  • 3x M3 thread insert M3xD4.2xL4.0+

  • 1x M4 thread insert M4xD6.0xL4.0+

  • 2x countersunk M3X16(...24)

  • 1x countersunk M3x8(...14)

  • 1x countersunk M4x14(...20)

  • 2x countersunk M4x16(+), washers and nuts

Optional:

  • JST 1.25 male and female connectors to make it easier to assemble and switch cables / wireless modules or whatnot

Wireless version:

  • There is now (2026-11-04) space to fit in small wireless module of ~size CR2032 (I will ask later if guy who I bought these from allows linking to his site). 

Spring in P/SM-30 was quite stiff for my tastes. It is about 13x35x1 mm (od, length, wire size) spring so I guess you could source one made out of thinner wire. I did cut ~5mm off from top and that worked too but it could be still a bit less stiff (matter of taste of course).