Elite North: a Fractal North inspired Elite Liquid pump cover.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A pump cover for the Cooler Master Elite Liquid that has laser cut slats inspired by a Fractal North
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 102
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A pump cover for the Cooler Master Elite Liquid that has laser cut slats inspired by a Fractal North.
Print and Wood Slat instructions
If you do not have access to a laser cutter you can use the template to cut the slats out of wood by hand. It supports wood slats up to 6 MM thick. Print the diffuser out of a translucent filament. Make sure you print the outer shell out of a opaque filament.
Assembly
Glue the wood slats into the diffuser using the tabs to align it. Press it into the main body aligning the bottom of the diffuser where it spreads out. It is now ready to install on your Elite Liquid AIO.