Panda Breath HEPA filter latch for Snapmaker U1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This allows the HEPA filter in the Panda Breath heater to be changed out the front of the unit when installed in the U1.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 100
- Wydruki
- 0
- Wyświetlenia
- 584
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This simple HEPA filter bracket replacement for the Panda Breath heater lets you swap out the HEPA filter from the front without removing the heater from the U1. The normal method of swapping the filter out the top of the Panda Breath is blocked when installed into the U1. To install this just remove the U shaped bracket that holds the retaining plate for the HEPA filter and install these parts using the original screws. Make sure the two screws for the latch stay tight to keep the latch working well. Designed to be printed in PETG.
Updated with cleaned up files 5/8/2026