1 / 3
Gaerne short starp for BOOT SG-12 SG-10 — zdjęcie 1
1 / 3

Gaerne short starp for BOOT SG-12 SG-10

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hello everyone, I’m sharing the bottom (shortest) Gaerne boot buckle strap.

Ocena
0 / 5
Polubienia
4
Pobrania
45
Wydruki
0
Wyświetlenia
115
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Public Domain

Hello everyone, I’m sharing the bottom (shortest) Gaerne boot buckle strap. I would recommend printing this strap from hard TPU. I have printed two pieces: one from TPU and the other from PETG. Honestly, both materials seem like they will work fine for the strap. However, I’m leaning more toward the TPU version simply because TPU is more flexible and resistant to gasoline and UV rays. PETG is likely to degrade over time.

Print the part on the side. I included man-made support it peels off easily. 

Tagi