Liczymy pasujące modele…
This bracket is made for 10" racks. They have the standard dimensions of 1U (44.5mm) in height and 250mm in width. With these dimensions the mount can be printed on a print bed with the dimensions of 220mm x 220mm. The mount is designed…
A 10-inch rack mount for the TP-Link TL-SG108 | TL-SG108PE | TL-SF1006P | TL-SG608E switches. This mount has been tested on both V3 and V5 hardware revision of those switches, but it should be compatible with other revisions as well. I've…
A sturdy 10-inch rack mount adapter for one or two TP-Link SG1005P. Also works with the SG105. To install the switch, simply slide it in. However, if you already added the rubber feet, remove them before installing the switch in this…
This is a 10-inch rack mount made for the TP-Link SG108/SG608E switch. I didn't like that other mounts mostly rely on a friction fit to keep the switch in place, so I've added locking tabs that slot into the mounting holes, which prevents…
------------------------------------------------------------------------------------------------- UPGRADED PARTS AVAILABLE! ------------------------------------------------------------------------------------------------- This sturdy 1U…
This is a 10 inch rack mount for a TP-Link SG105. I have printed it whit ABS. No support needed, I have added a custom support in the model. If you need a 10 inch rack mount for a different brand or you just need a cover plate I will…
Simple brackets, takes 4 screws. Mounts the switch upside down and leaves some air through for cooling. Updated with V2 for a nicer printing result, without the elephant's foot through the rounded bracket. It's angled now.
Description This is a 1U rackmount adapter that allows you to rack-mount a TP-Link OC200 Omada Cloud Controller side-by-side with a TP-Link TL-SG1005P 5-port PoE switch. Parts Required This adapter is split into two pieces so that it fits…
Mount for TP-Link TL-SG105 with cut outs for air vents. Under the mount are two channels for the dc supply cable. Mounting is done with 4mm sink head screws. Print with front facing down.
Mount for TP-Link TL-SG108 with cut outs for air vents. Under the mount are two channels for the dc supply cable. Mounting is done with 4mm sink head screws. Print with front facing down.
just removed the front logo because I could not get it to print cleanly.
How to generate label read in 10 inch Keystone Patch Panel with Label description It design not to be a tight fit (to prevent scratching), If you want more secure you can insert pieces of paper between shelve or use m3 screw on pre drill…
This rackmount adapter is designed to mount the TP-Link TL-SG1008P switch in a 10-inch network cabinet. The frame takes up 1 unit of rack space (1U) and is optimized for ventilation to ensure efficient heat dissipation. The adapter can be…
It design not to be a tight fit (to prevent scratching), If you want more secure you can insert pieces of paper between shelve or use m3 screw on pre drill hole on top or below My print settings layer height: 0.2 wall: 3 infill: 15% If…
A bracket to mount the TP-Link TP-SG108 switch under a table or desk. Use 4 x #8 wood screws. Switch is held into place using bumps on the bracket that fit into the existing switch mounting slots.
A 19-inch, 2-part, modular rack mount for the TP-Link TL-SG108 | TL-SG108PE | TL-SF1006P | TL-SG608E switches. I have included the 3MF file as well. This mount is part of a 19-inch modular rack mount system I designed. You can mix and…
Remix of AR15 grip to fit the GBB or SSG10 a3 handle. Just measure your mount, it should be around 10mm (check the attached picture) Category: Toy & Game Accessories
Notice ℹ This mount also fits the "NETGEAR" and “D-Link” equivalents of the equipment mentioned here, since they all use the same chassis from the same OEM's Accton Technology and Delta Networks . Description This is one of my extra…
A modular 19-inch rack mount for the TP-Link SG1005P. Also works with the TL-SG105. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models here…
This is a remix of this mounting plate by asp55 on Thingiverse. This one has the inserts a bit closer than the original to fit newer TL-SG105 switches. Just use double sided tape or whatever you want to mount the plate and attach the…
UPDATE: 25/02/2025 I have updated the design, to compensate for the MicroSD card in the Raspberry Pi, and also adjusted the end of the router back to fix some occasional XYZ errors while printing. U1 10" Raspberry Pi 4 and TL-SG105 Rack…
Rack mount for TP-link ER605 router and/or TL-SG108PE switch Files are only provided in one direction, don't forget to mirror to make the complete 1U unit Holes are 3,5mm. Use M3 screws and nuts. I had to redrill. I printed mine in very…
A 10-inch rack mount for the TP-Link TL-SG108S-M2 2.5G switch. This model is part of a series of 10-inch rack mounts I've designed. You can check out the others here . I have added a .3MF project file as well. Do you like my models?…
I designed this holder for mounting the TP-Link SG105 under my height adjustable desk. I used 2xM3 screws with fitting nut and 2x M3,5x16mm wood screws. I placed the nut inside the Screw-Terminals of the switch and fastend the screws…
There are other suitable designs for TP-Link SG108, but I didn't like them; I designed one in which you can easily slide the switch inside the rackmount. The hooks in the middle tightly fit with the body of the device, and it keeps it in…
TP-Link TL-SG105 10-inch Rack Mount 🖥 Keep your TP-Link TL-SG105 securely mounted in any standard 10-inch rack! This remix adapts the original 8-port TL-SG108 design to fit the 5-port TL-SG105. It adds a robust latch rather than relying…
The model is a redraw from scratch of the din rail mount part from CrazyIvan359's Orange Pi 4 LTS DIN Mount and added parts to attach a TP-Link TL-SG108E Smart Switch. It is designed with FreeCAD, so you can easy adapt it to your needs.…
1U rack shelf for 8 port ethernet switch tl-sg105 print settings: 15-20% infill 0.2 layer height
rotated the honeycomb pattern to make it easier to print
Wall and ceiling mount TP-link TL-SG105 made in thinkercad 3mm thick walls
Simple bracket to mount a network switch to a wall or other surface. print 2 brackets, one for front, one for rear. I used #6 screws to mount. Designed in Fusion, parametric model is attached for easy editing to fit your router/switch.
Wall mounting bracket for our TP-Link TL-SG105 network switch.
10" Rack Mount Solution (1U) for a TP-Link TL-SG108PE Switch. You can use double-sided tape to secure the power brick in place and zip ties to manage the power cord. The screw holes are designed for M5 screws Dimensions ( in mm ): W=254 x…
A 6-inch Rack Mount for the TP-Link SG1005P | SG105 | OC200 series. This model is part of a series of 6-inch rack mounts I've designed. You can check out the others here . Do you like my models? Consider buying me a coffee ;) Print…
An easy way to mount you TP-Link switch to the SKADIS pegboard
------------------------------------------------------------------------------------------------- UPGRADED PARTS AVAILABLE! Click the link to get to V.2 of this part:…
This is a mount for a TP-Link TL-SG105 network switch. This can be used to mount the switch under a desk or to a wall. Printed on an Elegoo Neptune 3 Pro with Elegoo PLA. I used 6 x ½" wood screws for mounting. To ensure a snug fit, the…
This is a remix of https://www.thingiverse.com/thing:3089825 with the following improvement: improve lan clip accessibility by changing the switch mount position reduce the mount width from 12 to 10mm slightly adjusted dimensions for a…
You need zipties for the power brick. The switch slides into the mounting brackets and locks itself in place. There is also a version for 19 inch racks:
remix from 6.5 inch rack i dont have device to test this print, use at your own risk If you enjoy my work, please consider support at link in profile.
Designed this to mount the TP-Link TL-SG108-M2 in a 10-inch rack. The switch doesn’t fit through the front opening but fits inside, so I made this custom shelf to hold it securely. Printed with - PETG If this print helped you out,…
Simple mount to for a Meross MSG100 smart garage door opener. I added a spot on each end so that I could zip tie the cables as a strain relief mechanism.
Tenda SG105 Gigabit Ethernet Network Switch DIN rail mount You can use standard mounting holes. Lock the nut into the part and tighten the screw so that the network switch is firmly in place. Try a few times. You can also use a drill, for…
TP LINK GS108 Wall Mount Needed a wall mount for my TP link, trying to tidy everything up. Just thought it may be of use to someone else. Simple one piece print. I printed in PETG.
A 10-inch rack mount for the TP-Link TL-SG105-M2 2.5G switch. This model is part of a series of 10-inch rack mounts I've designed. You can check out the others here . Do you like my models? Consider buying me a coffee ;) Print Settings…
Wanted to use in my 10-inch rack setup since I need the extra space under the Pi for an errant tall PoE HAT in a 1U rack below where this rack will be installed. I subtracted some of the material from the print model surrounding the…
Mounting Plate for TP-Link TL-SG105 switch. Material: PLA+ Infill: 20% Support: Touching Buildplate
3D model for 3D printing designed to mount a TP-Link TL-SG108E switch into a 10-inch rack. The switch is inserted without its original metal case – only the bare circuit board is used. You will need m3 inserts. Print withou supports.
This is a design allowing to mount TP-Link SG1024DE switch on a wall or table. It is designed in 3 different parts, one on the left and one on the right that are screwed onto the switch, the 3rd piece serves both sides and works as a…
Just a small backplate to secure the switch in place. You can use double-sided tape, a single 3x16mm screw or even cable ties. I was originally going to mount on the underside of my desk but after printing figured I could just zip tie it…
This mount is easy to print, resource friendly and reliable. There is no need to use two handles. But it can certainly add grip security. You can use doublesided tape/something else to make it REALLY tight. I'm recommending PET-G or ABS…
This is a renter friendly wall mount designed for the TP-Link TL-SG105 5-Port Desktop Switch. Add 3M Command Strips (or something equivalent) to the back of the mount, put it on your wall, and hook the network switch onto it. Printed in…
Update 11/18/2024: I have added a version with larger openings for round cables. This is a quick little cable bracket for the TP-Link TL-SG105 5 port ethernet splitter/switch. Bracket will snap or slide into place on the unit. It allows…
Rack10 mount for switch TP-LINK TL-SG105
To secure the switch, insert into the rack mount, Then insert the small side into the switch slot and slide the large side (with the flat side toward the back of the switch) onto the raised area on the mount to lock it into place.
A simple mini rack slot in for TL-SG108E TP Link switch
TP-Link TL-SG108 Network Switch mount compatible for mount into an IKEA pax cabinet hardware needed: 2x heat set insert M4 (length: 8,1mm) - i used the one from Ruthex 2x M4 x 10 mm countersunk head screw 4x euro screws 6,3 x 16 mm (IKEA)
Print with the wing on the bed.
I made this since i could find others People work that published any CAD-Files under Public-Domain I've tested it for mounting my TP-Link LS108G and TL-SG108 as well. Feel free to edit my design for other Switches as well. Please…
A front picatinny rail for the Novritsch SSG10A3, or the MLC-S2 Skeleton Stock from maple leaf in general. Also added the .f3d (Fusion) file, in case someone wants to remix for example the base of the model. I printed it on my prusa…
A 2 part modular 19-inch rack mount for the TP-Link TL-SG105-M2 2.5G switch. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models here to find…
---> English Lab Rax - 10" - 1U - TP-Link_TL-SG108E: TP-Link_TL-SG108E 10" 1U Mount with lid. 2x M3 heat inserts + 2x M3x6mm needed. I'd be very happy to receive some feedback. :) ---> German Lab Rax - 10" - 1U - TP-Link_TL-SG108E:…
Designed to attach to the underside of a desk, for TP-Link TL-SG1016D 16 Port Switch. Print two pieces Unter Schreibtisch Halterung für einen TP-Link TL-SG1016D 16 Port Switch. Zwei Stück drucken
A simple bracket that can be used to mount a TP-Link TL-SG108E 8 port switch in a Leviton structured media center. Requires 2 47615-NYL mounting pins and two #8 pan head screws. The #8 screws are 110mm apart so this may be usable with…
Small switch stand designed to work with TPLink SG108E, 8-port switch, but should work with any switch that is 158mm wide which I believe a lot of 5 and 8 port switches are; just double check yours. The bottom cable ties allow for your…
This is a 1U mount for the TP-Link TL-SG108 8 port switch, but I suppose it will hold anything that fits this opening. Dimensions ( W x D x H ) 6.2 × 4.0 × 1.0 in (158 × 101 × 25 mm) The idea is the pins hold the wings in place as well as…
Notice ℹ This mount also fits the "NETGEAR" and “D-Link” equivalents of the equipment mentioned here, since they all use the same chassis from the same OEM's Accton Technology and Delta Networks .Notice ℹ This mount also fits the…
Remixed this to make it fit a 19" Rack, adapted mount from @Mauker you can use the mounts side by side, ore use some of @Mauker's modular Parts 3x M5 screws 3x M5 hex nuts. Thx LikeAZanda @Mauker
Adaptation of the original print for a TP-Link SG108PE v2
A remix of an already good model. Changes. 1. Adjusted the height on the inside as my switch was 25.8mm high. 2. Added radius on the ventilation slots on the side to reduce the bridge when printing it standing on the front. 3. Added…
I recently purchased a tp-link multigig switch for use in my home network. The switch itself was designed for desktop use, so I decided I would design a bracket to adapt it for rack mounting. The bracket is split into to halves to be…
Wall mount for the Meross MSG100 smart garage door opener. Most 1 1/2 screws should work for mounting. You may need to use a brim to print this.
Vertical stand for the TP Link SG105 switch. If your printer is perfectly accurate this should be a decently tight fit. Very stable with a small footprint. Also included a cut out notch as it appears the SG105 has air vents on the sides…
A 10-inch rack mount for the TP-Link TL-SG1008D V5 switch. Same version as reviewed here: https://www.servethehome.com/tplink-tl-sg1008d-review-unmanaged-8port-gigabit-switch/ This mount comes in two variants, one for the plain switch,…
collection https://www.printables.com/@yahbluez/collections/518691 Needed an under shelf mount for this small switch… …used FreeCAD to make one. (Feel free to use the included CAD file to make and sell your own. licence: GPL v3) Picture…
Part of my wider “Pndlsm's MiniRack” series, here is a mini rack adapter (10 inch width) for tp-link 8 port switches. Design uses Hex grating of 8mm edge to edge and 2mm thickness throughout Should give a satisfying and loud click when…
This is just a simple wall mount/shelf for the Mini server rack for TP Link TL-SG108 and Raspberry Pi model to sit on. That model can be found here . I printed with 25% infill in PLA and seems to be plenty sturdy. I made it more on the…
This model is used to combine a TP link switch with a part of this (amazon) or this (aliexpress) 24 port patch panel. After receiving the patch panel I noticed it consisted of three 8 port parts. I already had the TP link switches and…
A custom-designed wall or desk mount holder for the TP-LINK TL-SG108E 8-Port Gigabit Switch. This holder securely fits the device, ensuring stable placement and easy access to ports and LEDs. Ideal for organizing your networking setup at…
A simple way to attach your tp-link TL-SG108S Switch to the IKEA SKADIS peg board. Based on cloudybasements design.
1U Mounting panel for a TP-Link TL-SG108 to match the Modular 10" inch server rack project
Wall Mount Brackets for TP-Link 8 Port Gigabit Switch TL-SG108
I recently ran into an issue installing my new WiFi Smart Garage Door Opener. There was no bracket to mount the sensor to the door and my door had a lip on it preventing me from lining it up easily. I made this bracket that the sensor…
A lightweight bracket designed to hold the TL-SG105 TP-Link Desktop switch. Can be mounted to any flat surface, wall, cupboard etc. The mount is customised to suit the ports and requisite access points of the switch box. the mount is…
Mounting bracket for Meross MSG100 / Refoss RSG100 / Refoss MSG100 smart garage door opener (non-affiliate links). The bracket is designed for Craftsman GDO, but should fit on any Chamberlain/LiftMaster or other GDO with mounting plate on…
A mounting plate for the TP Link TL-SG105 E network switch that allows you to attach it to a flat surface using double-sided tape. I recommend using PETG or another strong filament to keep the screw heads from breaking off. Print with…
Remix to accomodate TP-Link TL-SG108 (had de 94mm verison) a rasberry pi 3B+ with heatsink and my ISP ONU model AN5506-01-A1. The parts that are different from original are in Gray. Both of them connect with the LEFT TP-Link TL-SG108…
I made this to be able to mount my switch upside down to save space. It snaps on from the side and is then held by the rubber feet and friction. If you remove the rubber feet from the switch it could also just slide in and hold by…
Click to Read About 6.5 inch and Rack Frame 6.5 inch Rack Mount Collection It design not to be a tight fit (to prevent scratching), If you want more secure you can insert pieces of paper between shelve or use m3 screw on pre drill hole on…
I really liked the original ESRack system design created by @EvilProphet . I created a module for TP-Link Switch TL-SG108 from the ESRack Customizable Device Mount by @DavidKahler_64887 The ESRack system includes the following components:…
I really liked the original ESRack system design created by @EvilProphet . I created a module for TP-Link TL-SG1008P from the ESRack Customizable Device Mount The ESRack system includes the following components: Mounting Brackets - used…
For the TP-Link TL-SG105E. Air vents not coverd, all ports/connector remain useable, all LEDs visible.
This 3D printable holder is custom-designed for the TP-Link TL-SG108PE 8-Port Gigabit Desktop Switch , ensuring a perfect and secure fit. It's ideal for mounting your switch on workbenches or mobile parts , helping to optimize space and…
As mine broke a few month after printing, I decided to robustify it. Very good design from t0b1 Category: Electronics
I created this rack mount for TL-SG1005P as a part of my Raspberry Pi Rack. This module fits DAP Audio 2HE rack cover . The insert is mounted with M3 sink head screws. The PSU is held in place by a special clamp (M3x5mm cylinder head…
This bracket is designed to mount a Netgear TL-SG105E 5-port network switch on a Multiboard grid using the versatile Multiconnect connector system by DavidD . Print the Model The clearances are optimized for a tight fit and work well with…
Underdesk mount for the TP-Link TL-SG105-M2 (2.5Gbit 5-port Switch). You can either print the (Bracket Top Left & Top Right) OR (Full Bracket & Magnetic Cable Holder). I have not tested the full bracket yet, will do so soon. Materials…
Part Description ESRack Module for the TP-LINK TL-SG108E. The dimensions are slightly different from the SG108. Possible Configurations: - [Mounting Bracket Short] + [Module] + [Module] + [Mounting Bracket Short] - [Mounting Bracket…
Remix off TL-SG108E holder by Jesse Schauer to fit TL-SG108 mounting holes instead.
Remix of the 6" enclosure to mount a Netgear TLSG105 PE mount PoE switch. Printed in PLA, face down, without supports.
