1 / 17
Tenda SG105 Gigabit Ethernet Switch DIN rail mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tenda SG105 Gigabit Ethernet Network Switch DIN rail mount You can use standard mounting holes. Lock the nut into the…
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 144
- Wydruki
- 1
- Wyświetlenia
- 1073
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (2)Kolekcje (29)Powiązane
Tenda SG105 Gigabit Ethernet Network Switch DIN rail mount
You can use standard mounting holes. Lock the nut into the part and tighten the screw so that the network switch is firmly in place. Try a few times.
You can also use a drill, for this you need to disassemble the network switch. It's not difficult, use a plastic card. To do this, use the 4 screws at the corners.
Compatibility:
More DIN rail mount design:
| | | | --- | --- | | | | | | | |
Category: Electronics