Liczymy pasujące modele…
There are so many of these out there. The AAA batteries in others could get clogged. This should be fixed here. I modified this so that you could attach them side my side to form a block and allow for more storage. Mix and match as many…
Extendable and modular stackable drink dispenser, multiple combinations and configurations in heights, levels, rotations, etc. Model measures The model is designed for the 66 mm diameter x 115 mm long can. You can make other dimensions of…
Handle length is 200mm and you can extend it up to 340mm. I printed flap with TPU filament and other parts with PLA. I printed rod and locking nut 0.16mm layer height and other parts with 0.2mm. I made threads 10mm long for more strength.…
An extendable track for your marble run compatible with Gravitrax. Depending on the height, the original rails were always a little too short. With this track you can adjust the length variably. Print instructions: You can print it…
I was not able to find a holder big enough for all my cables, so I created one. The holder can be exteneded to the required length by inserting multiple middle sections. I have a few thicker cables, so I created the left section with…
My grandson wanted a snap open sword and the ones on printables didn't quite work right. I made my own version that i was able to expand upon similar versions that don't quite work right. this one has a cap to allow you to work parts…
I designed this toy for my children to make reaching distant objects fun. The semi-support structure means joints, jaws, and screw print without supports; only the arms need build plate supports for optimal results.
The original design (https://www.thingiverse.com/thing:5322891/) has the arms tilting up, I rotated the clip part down 10 degrees so the support arm is parallel to the cricut's platform. Extendable Design allows better support for a 24…
The spool holder fits all spool sizes from 10 to 90 mm in width. It takes standard skateboard bearings (22x8x7 mm), and only two M3 nuts and two M3x10 screws to assemble. It is designed to be resized fast and easily and be as compact as…
Pocket indicator. It is useful for me when working together on one monitor, for example, when I need to point something. Folded length approx. 13 cm. When unfolded, approximately 50-52 cm. Max diameter approx. 13 mm The indicator consists…
Inspired by the SRU Katana Grip The Extendable Katana Foregrip is a length-customizable foregrip. By printing additional spacers, one can adjust the length in increments of 10mm. Hardware required: 1x M4x25mm bolt+nut (or 6-32x1") for…
UPDATE: I now recommend to use Neels remix instead of this version. Printing separate connectors on their side and using them to connect baseplates works much better and has more flexibility then this design. There will be a stackable…
Hello, Welcome to my profile, full of models and miniatures :-) I have an Extendable, retractable, collapsing long sword for you. The individual parts fit together perfectly and it is very well thought out and so you can even play with…
a remix of the popular fidget star toy, adding a star shaped handle which makes it excellent for spinning,
Helping to organize Drawers
This is an extendable compact tripod perfect for carrying around, without being in the way. It folds out at the end of it's legs by 180° to make it bigger. Lock the position with 3d printed screws. I wanted a small and compact tripod,…
This is a custom universal body/back scratcher designed for "Prusa Flash Contest". Infino Scratch is a multi purpose back and body scratcher (with easy click and release). innovative click and release design for easy extendability to any…
Looking for curves and curved slopes? Looking for the Bridges/Plates/Grid system from the photos? 08.02.2023: Added a Flexible variant with 2-* parts. Simply print as many outer and inner rail parts. 08.02.2023: Added 4-7 Tiles variant.…
Update 7.02.2023: Added Pre-Build Bridges and a Hexgon Plate. You can extend them with any other element using the top/bottom clips. This spacer (grid)element has several advantages. The Hexagon connector is very tight and holds firmly on…
An unofficial 10-inch rack mount for the Tenda 2.5 Gbit Switch (TEM2010X) Any Switch that has similar dimensions should fit. Print Settings Printer Brand: Prusa Printer: Mk3s Rafts: Doesn't Matter. Supports: Yes. Resolution: 0.2…
I wanted to store a LOT of cables in the hexagonal Portable Cable Organizer / Winder, and I wanted to store them together in drawers lined with Gridfinity, so I made this pair of models based on the geometry of an existing Gridfinity…
This sleek and durable Nespresso Original Pod Holder is capable of displaying over 50+ pods with as small as a footprint as possible! With no sacrifice to convenience, the pods easily slide out from the top keeping you caffeinated all…
Wanted to make one of those extendable pointing fingers going around, but couldn't find a proper one. So I decided to make it on my own, it extends up to 60 cms and is quite sturdy when done so. Simple to assemble, print each part, slide…
Please read entire description before printing. This is the 3rd version of my drain snake that I designed. This version is a modular extendable version, allowing you to conenct as many pieces together as you want, making the snake as long…
A simple wall mount for the Tenda Nova MW6 mesh node. It’s quite a snug fit.
This is a socket holder in chain form! Files provided for 1/4", 3/8" and 1/2" drive sockets. To make an open ended socket holder: Print as many "links" as you have sockets - 1. Print 1 "ring" and one "plug" To make a closed loop simply…
Version 2 of this model: https://www.printables.com/model/446181-jorgensen-f-clamps-holder This updated version has been split into 3 parts. A LEFT, a MIDDLE and a RIGHT. Print: 1x LEFT 1x RIGHT 1x to as many MIDDLEs as you need. They…
Printed with 3 walls, 8% gyroid, no supports, and outer brim to help with bed adhesion.
Hello, Welcome to my profile, full of models and miniatures :-) I have for you a Collapsible, Extendable, Retractable Baton. It is a good toy and a cosplay option. The head at the handle is screwed. The material I used is PLA/PETG Basic…
About This model has an add-on to the original design. With this add-on you can connect two holders (or more) to each other to create a really large card holder. Attachment Press really firm to get the add-ons in place. Once placed they…
I have created a very simple extendable rod that can screw into itself. Print multiple for length. Print with 100% infill for rigidity. Size as you see fit. Done it because I have been looking for one and couldn't find it in the right…
A cool grabber to grab things from far distances!
Sometimes size simply does matter. Especially when you are trying to vacuum you cars interior and have to get into those very slim and deep spaces between the front seats and the power train tunnel. Of course vacuum cleaners come with a…
This book stand has a super flexible design, so you can adjust it to fit your needs. When it's pushed together, it's 15 cm wide, but when it's fully extended it measures 52 cm (that's the base version, by the way). And if you need even…
I have Roland V-Drum TD-07KV, frame post diameter is roughly 38.15 mm. So I didn't know other Roland post sizes. So please measure before printing it. Printed with eSun ABS+ without Support. Between 20% and 40% infill is more than enough…
Hello everyone! This model is my interpretation on the scratcher contest. This model is perfect for your cat, dog, or yourself! It extends to 35 cm/14 inch, it locks itself by a soft pressure-ish lock. I'd print this in a tough PLA to…
2020 aluminum profile v slot based on original specs comes with 4 different sizes 50,100,200,300 mm 4 types of parts: clean profile profile w/ female connector profile w/ male connector segment profile w/ both connectors the connection is…
This is a simple, minimalist garden stake that won't take a lot of time or filament to print. Any size you choose repeats easily, so you can reprint as your plants grow: simply reprint that size as needed and slot the peg into the end of…
20% infill. Print on back, no raft required.
A simple support with thread. It can be adjusted in the range between 20-38cm. I printed it with 0.2mm layer height.
About This bottle rack holds 5 bottles with a diameter of 60 mm. The cylinders have a diameter of 62 mm and fit the regular beer bottle. On the side of the model there are four holes where you can put a plug or magnets (6mm * 3mm) to…
A modular shoe holder for a closet. Print multiple and use like a hanging vine holder!
The Amulet of Stendarr from Skyrim Category: Video Games
Tenda SG105 Gigabit Ethernet Network Switch DIN rail mount You can use standard mounting holes. Lock the nut into the part and tighten the screw so that the network switch is firmly in place. Try a few times. You can also use a drill, for…
Remix of @cq_15273 "Infinitely Extendable Long Tube Nozzle - Dyson >=V7", adapted the size to fit the Dyson Big Ball.
This basic roman column container measures 34.8 mm x 40 mm and is 56 mm high. You can use it as a stand to add importance to any small object, as a container, or as the start for a miniature Vaporwave party. The lid and the bottom of the…
Wall mount for the tenda MX12 WiFi mesh router.
AppleWatch-Band holder for 40/41mm and 44/45mm watchbands with a band width of up to 26mm. No- Support needed - Print in final position with a rim Extenadble by downloading a left piece (,various middle-pieces ) and the right piece. →…
This is part of my attempt to create 8mm(R/S) / 16mm film scanner, where the two pieces will be connected and attached to a Raspberry Pi HQ camera (C-mount) and then a Schneider Componon-S F2.8/50mm lens (M39 thread). Short design video…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here are Hook Hooks. Hang them on…
Many users suggested wanting a retractable hand that can change gestures, and we've created it. There are a total of 5 interchangeable gestures. If you like this design, please click the 'like' heart button to show your appreciation and…
Regla que se puede extender infinitamente, cada extensión agrega 21 centímetros.
This is a work in progress, feedback is welcome. The two CAD pictures are V3 and the other pictures are V2. V3 pictures coming soon. I made this with the intention of being able to attach different portable monitors to a “tough” laptop,…
This axe model is super detailed and can be resized to your preference for crafting your very own in-game item replica. It can be printed in place with no need for extra support or assembly. Have a blast getting into your new role! The…
I really liked the original design, but I wanted something longer so I made this little connecting piece. Basically, I brought it into Fusion 360, fliped a model over, aligned them, then I cut it, joined and this is how I got here. It's…
This model is easily buildable. You may need to sand a little bit to get the pins to fit but they slide together really nicely. You will need glue to attach the end caps into the pins. Hot glue works fine. The short pins go into the…
Źródło oznaczyło ten model jako treść 18+.
Tablet or laptop stand with widths from 9.2 mm to 20.2 mm. Includes a mask for cutting 1mm thick EVA foam, both in the support areas of the laptop or tablet and for the support base. Antistatic tape can also be used for the base of the 3D…
A useful end to get into tight spaces, print as many extensions to make it as long as you want. Great for sideboard, side of fridges, tight spaces… There are 2 parts, the base and the extenders. The Extenders push on and twist to lock on.…
It is not an ordinary ruler... it is a whole new measurement method... Situated between a folding ruler and a tape measure, this handy measuring tool combines the best of both worlds. Extensible, yet rigid due to the sliding action. And…
Need Screw And Bolt : 2 M3x8, 1 M3x12, 1 M3x14 This is Some Part Of My Design. This Project Is Action Base Can Change Part As You Like. You Can Change Other Part For Each Series Of Gundam. Or Can Use With Diorama I Design(In Progress).…
I print these out of PETG but you can probably print these out of PLA as well. I use the .3mf file and print the parts concentrically. Design works with the Wurkkos TS10 and Convoy T3 Consider supporting us on Patreon!
Support for plant. Easy to print and modular. Allows to add extra length when the plant grows. Print settings: Material PETG (but can be printed with others). Layer height 0.2, 6 perimeters and infill 25%.
a Simple Wall Mount for Tenda Nova MW3
If you downloaded the model, it means you are interested in it. Don't forget to like it, please!
Inspired by Dave Rome's tool from this escape collective article, but this tool allows you to thread extensions on for short printers or long head tubes. This tool is used to hold the stem and any bearings, spacers, or other pieces in…
Posted with permission from 3DPmom (https://www.printables.com/model/794382). I loved her extendable carrots but didn't want to print a whole set of 4, so I sculpted some dirt that works with Kmart's tiny ceramic pots. I then found some…
This tower model was originally designed for a potential future toy crane project but it can be used to construct any ta
Extendable Drink Cooler A threaded design that fits cans of most sizes. Engineered for insulation while still being slim and comfortable to use. Show your appreciation for Ukraine, Open Source Hardware, Linux (Tux), or the sun! Plain…
i bought a tenda pan and tilt security camera and it didn't come with the mount so i made myself one.
If you downloaded the model, it means you are interested in it. Don't forget to like it, please!
Print all parts with a brim. I suggest printing inside pieces near each other so that brims attach together and help keep it from being knocked over. Print at 0.2mm. You will need two of the grommets. Or maybe more. See video to determine…
I made this case to create something tidy for my wall mount of Tenda P200 powerline and glinet router to extend my wifi at home. Maybe useful also for you. My advice is to paste with vinyl glue the two pieces to avoid support on printing.…
TSX05 : Extendable Side Table Consider following me on Instagram I post all of my projects to build a portfolio of my projects. https://www.instagram.com/smackmax_/ Has tiles for hardware M4x25 (recommended when using extensions) You will…
Celebrate the 100th Anniversary of the film Nosferatu (and a 20-year-old Spongebob Squarepants joke) with this creepy (non-articulated) light switch attendant. Print Settings Printer Brand: Creality Printer: Ender 5 **Rafts:** Doesn't…
Re-upload of model https://www.thingiverse.com/thing:6791127 Modular shoe rack infinitely extendable by wanderlust03 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license. Original Description by…
A easy extendable hex ruler for 33mm flat to flat hex games to assist in quick measurements for my Lancer TTRPG Games. No special printing instructions, though I found its connections a little loose and I wrapped the male end connectors…
Extendable Z20 barrel sprocket to be used with fischertechnik. The barrel ends may be used with the regular fischertechnik nr 35113 collet. The barrel can be extented with additional 10mm extentions on a 4mm axle. I needed the barrel for…
Fairlead Hook for Outdoor Sun Shade roll up aluminium profile - Gancio per profilo in alluminio tenda avvolgibile per esterni Update 18/06/2025: Added HFO_RV1 Update 28/08/2025 Added HFO_25.stl: Maximum diameter supported Ø 25 mm Resize…
Playing card holder / storage box / tray with lid - stackable - extendable. I can adjust the size to any other card size or slot number on request. Currently fits the Catan cards (original edition) with 44x68mm². The lid closes firmly so…
Quickly created in Tinkercad. I printed in PLA with a layer height of 0.28mm, 20% infill, speed set to 100mm/s and it took about 20 minutes total.
Allows you to convert the IKEA RANARP clip lamp into an extendable one.
In an effort to make myself and my wife as comfortable as possible on long trips, I designed and printed these clips that cling onto the sun visor and allow a 100mm (3.9") x 300mm (12") piece of 1.5mm (1/16") material ( hard plastic,…
Here is a concept of printing a camera tripod (the one you can easiler buy from any retailer) and make it printable on a FDM 3d printer. The model is designed to be print in place. The model is currently under development and I will not…
Remix of Thingiverse user Tedoyan's "Cap Rack (Extendable with Dovetail joints)" thing:4897564. Tedoyan's design to hold the caps in place worked great however the dovetail joints would work loose over time causing my hats to fall out on…
The mounting brackets have 5mm holes for screws. The tenda switch has the following dimensions: - Width: 101 mm - Length: 100 mm - Height: 26,5 mm Happy printing and mounting :)
The pleasure of reinventing the wheel.... Push your spool or bull or thread onto the pin and it will merrily roll along as you're using it. You can disassemble and it will snap in place for travel. You need a 608 bearing. There is is all…
Fiskars manufactures a line of tree pruning tools with extendable reach and a pull string operated pruner. They are popular and effective pruners and a good value. However, the pull string has to be long enough to function at full…
Insert curtain holder/Tappo bastone tenda M4 Thread IKEA RACKA Update: 26/07/2025 added Insert_curtain_holder Ø26.5_28 Scale/Resize to adjust dimensions All our designs are free to download and use—because sharing drives innovation. Your…
UPDATE 1: Added a borehole to the Watchhalter to remove the watch charger easier! UPDATE 2: Add of another three key holders. Further extensions through gap in the bottom possible This is a simple Accessoire Storage for your IKEA Kallax…
Stendarr in D&D 5e Domain and Alignment Alignment: Lawful Good Domains: Protection, Life, Order Suggested Cleric Domains: Life , Order , Peace Symbol: A stylized gauntlet or a radiant shield Colors: White and crimson Core Tenets of…
With this part you can repair your suitcase if the push button doesn't work as spected. You can see the printed part in orange color in my own suitcase. Enjoy!
A headset holder which can be extended if it needs to hold your headphones (or whatever else fits your needs) and can be retracted if you are using the thing and don't need something sticking out of your desk or wall. The end piece is…
Egouttoir à vaisselle 40cmX40cm extensible jusque 65cm de long avec support de tasses ou bouteilles démontable et grand égouttoir à couverts 40cmX40cm dish drainer, extendable to 65cm long, with removable cup or bottle holder and large…
this is a camera mount i made which is supposed to be mounted on the end of the x axis of the printer. the holes for the mount are designed for a support that i made for the tenda camera that i use. Tenda cp series Camera mount by Marian…
La pieza se imprime en TPU y suple la pieza de plástico original.
Filament Roll Adapter for the Ender 2 Pro extendable Arm The Adapter fits into almost any standard Filament Roll. It takes a little bit of strength and caution to get it over the end of the extendable arm, but once its on there, it wont…
Printed this for a friend, I don't have any fish Print top part upside down without supports and bottom part right way up with supports Mesh is 2mm and the parts were printed in PETG Top part fits snugly into the bottom part, which has a…
![[Concept] Camera extendable tripod](https://media.printables.com/media/prints/954214/images/7278063_9920f005-e975-4bd6-8f58-91f1c244832e_3b3f95b0-8aeb-4a11-bf7e-b16fab4c336f/20240725_225054.jpg)
![Extendable Accessory Storage for Ikea Kallax + Extension [UPDATED]](https://media.printables.com/media/prints/34217/images/337982_a5e721d7-985b-4397-9fae-c5451b62bb60/3ae3807818da06551d5af3003ab25338_display_large_34.jpg)
