1 / 3
Rack mount for Omada router ER605 & TL-SG108PE
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1U Rack mount for TP-LINK Omada router ER605 and/or switch TL-SG108PE
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 303
- Wydruki
- 1
- Wyświetlenia
- 3836
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (56)Powiązane
Rack mount for TP-link ER605 router and/or TL-SG108PE switch
Files are only provided in one direction, don't forget to mirror to make the complete 1U unit
Holes are 3,5mm. Use M3 screws and nuts. I had to redrill.
I printed mine in very low draft quality 0.32mm layer high with CHEP's Hyper fast filament Friday profile for CURA.
No supports needed.
Notes:
Consider using brim or anti-warping tabs on the tray's corners to make sure it stays flat.