Network Switch DIN Adapter (TP-Link SG108PE)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DIN rail adapter for TP-Link TL-SG108PE switches, compatible with Fabian's fantastic brackets and remixes of it.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 597
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
I made this to be able to mount my switch upside down to save space. It snaps on from the side and is then held by the rubber feet and friction. If you remove the rubber feet from the switch it could also just slide in and hold by friction.
It should be easily remixable to hold most rectangular devices.
I printed it in PLA with supports (organic/tree supports work best), layer height 0.3mm, extrusion width 0.6mm for strength. Probably a better idea to use PETG or ABS, since it has bent quite a bit (the closet where it hangs is quite warm).
It mounts to this DIN rail bracket (or rather a remix with heat set inserts): https://www.printables.com/model/97222-din-rail-bracket
(There's only a render because it's already mounted in a dark closet. Seemed to print okay on my not terribly well calibrated printer)