TP-Link TL-SG105 10-inch Rack Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom 3D-printed mount for TP-Link TL-SG105 switch in any 10-inch rack
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 294
- Wydruki
- 1
- Wyświetlenia
- 932
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
TP-Link TL-SG105 10-inch Rack Mount
🖥 Keep your TP-Link TL-SG105 securely mounted in any standard 10-inch rack!
This remix adapts the original 8-port TL-SG108 design to fit the 5-port TL-SG105. It adds a robust latch rather than relying solely on press-fit, ensuring your switch stays firmly in place.
💡 Flexible Customization:
Users can further remix the model to add keystone slots for RJ45 Ethernet couplers if needed. In my setup, I route network cables differently, so additional slots weren’t required.
🛠 How It Was Made:
The model was split and adjusted in Fusion 360 for perfect fitment of the TL-SG105. Compatible with all standard 10-inch racks, not limited to any specific brand.
🖨 Print Settings (Recommended):
🧵 Material: PLA, PETG, or ABS
📏 Layer Height: 0.2mm
⬆⬇ Walls/Top/Bottom Layers: 2-3
🧩 Infill: 20%
Support: Not needed – PETG can bridge the gaps easily
✅ Tips:
PETG recommended for stronger parts if you frequently remove/reinstall the switch
PLA is fine for stationary setups
Ensure printer dimensional accuracy for a snug fit
Keep your TL-SG105 switch safe and stable in your rack! Feel free to remix or adapt it for your own network setup! 😄