Heavy-Duty Fire Truck Throw Bag Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fire truck mount for CMC throw bags. Pro-grade PETG-CF design for high vibration. Fire-service tough.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Features
Precision Fit: Sized to cradle the CMC bag securely without snagging the drawstring or reflective trim.
Open Front Design: Allows for a "grab-and-go" deployment—simply pull the bag forward and out.
Reinforced Mounting: Features a thick vertical tab designed for bolt-on installation with large washers to handle heavy road vibration.
Drainage Port: Includes a center cutout in the base to allow water to drain if a wet bag is stowed after a call.
Recommended Print Settings
Material: PETG-CF is highly recommended for its rigidity, temperature resistance, and resistance to "creep" under bolt pressure. ASA is a secondary option for high UV exposure. Avoid PLA.
Walls/Perimeters: 5–6 Loops.
Infill: 40%–50% Gyroid or Cubic for multi-directional strength.
Layer Height: 0.24mm or 0.28mm for optimal layer bonding.
Orientation: For maximum strength, print the bracket on its back
Installation Notes
Use M6 or 1/4" bolts with fender washers
Nyloc nuts are recommended to prevent loosening