Heavy-Duty Fire Truck Throw Bag Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fire truck mount for CMC throw bags. Pro-grade PETG-CF design for high vibration. Fire-service tough.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 61
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Features
Precision Fit: Sized to cradle the CMC bag securely without snagging the drawstring or reflective trim.
Open Front Design: Allows for a "grab-and-go" deployment—simply pull the bag forward and out.
Reinforced Mounting: Features a thick vertical tab designed for bolt-on installation with large washers to handle heavy road vibration.
Drainage Port: Includes a center cutout in the base to allow water to drain if a wet bag is stowed after a call.
Recommended Print Settings
Material: PETG-CF is highly recommended for its rigidity, temperature resistance, and resistance to "creep" under bolt pressure. ASA is a secondary option for high UV exposure. Avoid PLA.
Walls/Perimeters: 5–6 Loops.
Infill: 40%–50% Gyroid or Cubic for multi-directional strength.
Layer Height: 0.24mm or 0.28mm for optimal layer bonding.
Orientation: For maximum strength, print the bracket on its back
Installation Notes
Use M6 or 1/4" bolts with fender washers
Nyloc nuts are recommended to prevent loosening