Search results: rescue

Animal Rescue Team Board Game Minimal Insert

An easy organization for the pawns and tokens to shrink down setup and get to playing and packing up faster. The cardboard insert works mostly fine, so I figured I'd use that.

Ozone F*Race 2 rescue handle support

Print using TPU 3 outer layers and 10% infill, you can can easily adjust in the slicer to allow different reserve shapes.

Rescue Annie "Lung"

This model was requested a few years ago by someone to help recreate a part that was discontinued. This is to hold the bags that is meant to imitate the lungs of a CPR doll. It is a very edge use case but if someone needs it I want it out…

You Rescued My Love

Can be printed with anything and rescaled at the slicer. There is a hole at the wench and the top of the crane so the life raft can be secured with a sewing thread.

Sombrero for Figurines (Failed Print Rescue)

This cheerful sombrero was designed to rescue a failed panda print. Instead of tossing the print due to a mistake on top, this hat covers it up and gives it a festive second life! Print details: Supports: Use Organic/Tree supports for the…

Airport Rescue Vehicle Set (42068-1)

This is the Airport Rescue Vehicle set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's…

ADAC Rescue Helicopter

ADAC Rescue Helicopter

Canadian Rescue Helicopter

Canadian Rescue Helicopter

boat rescue v2

Use infill I used https://www.printables.com/model/1648762-dummy-prusament-spool-for-makers

Rescue Your Glue! - Hobby Lobby / Adhesive Guru 4.5oz Emergency Nozzle & Cap

Summary A professional 2-piece replacement set for 4.5oz Adhesive Guru (Hobby Lobby) CA glue bottles. Designed to rescue full bottles when the original nozzle clogs. Engineered for easy printing and perfect fit. Don't throw away that full…

Boat rescue V3

Use infill and supports.

Hostage Rescue Squad wargame 2 mm counter bases and box

These are 2 mm thick counter bases and a storage box/lid for Mike Lambo's Hostage Rescue Squad wargame. These are bases for the orginal counters to the game that can be found here . The numbers after the filename are the number that need…

Rescue Heroes - Geared Pincher Arm

My previous replacement arm parts were designed for FDM printers. This design is intended for resin printers. I had to press fit this together with pliers. I may go back and design a larger drive gear for a thumb to roll open and closed,…

Rescue Bot Insignia NO AMS

These numbers are in inch about four hours on Elegoo C.C.1 Red @ 0.1 Maroon @ 0.15 White @ 0.2 Dark Grey @ 0.25 Light Grey @ 0.3

Flash Point Fire Rescue Hotspot

Simple hotspot marker for the game “Flash Point Fire Rescue” to replace the cardboard tokens Designed in Tinkercad, Printed on Anycubic i3 mega. Base is 1.5mm thick if you wish to split the process to change colour on a single colour…

Multicolor Rescue Rangers Logo Magnet

This is model is designed to be printed with a Bambu Lab AMS or similar. I recommend printing with a .2mm nozzle at .14mm layer height. The best sheet magnets I have found to use with this model is Marietta Magnetics brand 30mil (with…

DJI Mavic Pro water landing float recovery rescue

Too hard for find good version of water landing. Take it. All-in-one. Foam or fully buoy. Base infill - 40%. Buoy/ponton - 5%. Category: R/C Vehicles

Flash Point Fire Rescue - Fire Engine and Ambulance

Flash Point Fire Rescue Ambulance and Fire Engine to replace the cardboard tokens The slots on these models are compatible with the my custom bases (on my profile) Fire Engine A fire Engine capable of carrying 2 figures 1 Slot for a…

Flash Point Fire Rescue - Damage Tray

This is a simple Tray for the damage cubes from Flash Point Fire Rescue, taking them from bottom to top in each row starting with the right-hand side shows house Integrity at 75%, 50% and 25%.

Rescue Spool

I received a spool that had a large portion broke off the edge. I wanted to respool it but had a challenge since the spool would not spin on rollers. I made what I’m calling a rescue spool that fits around the existing spool. I designed…

Baby Bed Rescue Model

This innovative 3D model was designed to repurpose and save a baby bed from ending up in a landfill, promoting sustainability and eco-consciousness. Perfect for DIY enthusiasts and parents looking to give their baby furniture a new lease…

LEGO FIRE RESCUE BOAT - Print and play

LEGO FIRE RESCUE BOAT - Print and play

Replacement Ladder for Home Depot Fire Rescue Truck DIY Workshop

Replacement ladder for the October 5th, 2024 Fire Rescue Truck DIY Kid's Workshop

KPZ/last rescue box

last rescue box (KPZ) is small every day cary box for small survival and medical stuff like small knife, paracord....

Tažné zařízení RC 1:10 , Towing device 1/10 RGT Rescuer RTR 1:10, Toyota Land Cruiser

RC trailer 1/10, RC příves 1:10 RGT Rescuer RTR

https://www.printables.com/model/1122014-tazne-zarizeni-rc-110-towing-device-110-rgt-rescue it is necessary to describe the parts when printing! Pneu https://a.aliexpress.com/_EQaJNvO PLA AURAPOL 25% infill 3 walls .02 layer height no…

Rescue wedge firefighters - Dveřní klín pro hasiče

eng: Wedge under the door that firefighters and rescuers can use. The wedge is modeled directly for use by firemen in traffic accident fires and other activities. The product is used at your own risk (everyone with an ID card knows what…

Flash Point Fire Rescue - slim character holder

Remix of stphung's character tray from his Flash Point insert ( https://www.thingiverse.com/thing:4816280 ). I wanted to print the improved insert by Hammeredagain ( https://www.printables.com/model/350334-flash-point ) but didn't want to…

Playmobil Air Rescue replacement skids

As per the title, these should fit neatly in place. They require two small zip ties to fasten in place. Print instructions Category: Toy & Game Accessories Print Settings Supports: Yes Infill: 50% Notes: Print for strength, I used 5…

Fire Rescue Door Wedge

Simple little wedge that some members of the local FD asked for. Hole for a lanyard if desired. Printed in ASA 100% infill, and it'll take a beating. Fuzzy skin for extra texture/grip. Added a smaller sprinkler wedge as well; not yet…

3D Sets Mini 4×4: Rescuer Servo arm XL size

I bought stronger steering servo for my Mini Rescuer but found out server arms provided with the model were too small. I remixed one to make it XL size. Fits perfectly my Savox SW-0267 MG.

Replacement propeller for Schleich Animal rescue helicopter (42476)

Tips: for few first layers reduce printing speed to about 60% directly on printer, that gave me consistent results and didn't tear or smear filament (could be some non clean spots on printing surface, so clean carefully before printing)

PAW Patrol Rescue wheels replacement projectile

I was asked to make a spare PAW Patrol projectile, there are a few versions available but this one has a square head which I couldn't find online. So I created one in Onshape . Print at an angle with supports for extra strength. Feel free…

Rescue Car (Red Cross) Mercedes for Lego Applications

Cut out inner structure, added wheels with rims and axles, divided the read doors, added hinges, added Red Cross signs, cut out side windows. Added red and blue alarm lights. Maybe good idea for remakers to cut the roof off and print car…

key chain rescue

prints in 2 colors.

3D Sets Rescuer Alternative Printable Tires

This more agressive tire for the 3D Sets Rescuer is printable with the 0.15mm Structural 0.4mm nozzle profile. (Standard suggested settings from 3D Sets) The model is already hollowed out and prints without any supports. The underside has…

Playdoh rescue

Easy repair this thing keeps breaking because of lack of quality. Front is the side with the nose on it Infil 100% Prin

inflatable rescue boat coastguard

The original model is great, i just simplified it a bit to make it more robust for my little daughter as a toy. I printed the boat on my Sovol SV06 Plus with the following settings: Material: PETG from Sunlu in Sakura Pink Nozzle-Temp:…

RESCUE-HJ4

RESCUE-HJ4: The Ultimate Portable DJ StationRescue the Party, Anytime, AnywhereIntroducing RESCUE-HJ4, a revolutionary portable DJ station designed for DJs who are always on the move. Inspired by the lifebuoy, this innovative system…

3D Sets Mini 4×4: Rescuer servo arm

Modified servo arm for use with Mini Rescuer. Print with 0,15mm layer height.

Rescue Reserve Button (quick pressure closure or normal sewing)

Just another nice button. Can be sewn normally, or - if there is no time or no accessories - quickly attached with pressure for an emergency. Maybe not for permanent use, but enough until home, or until the day is over. Use Nylon or ASA…

Last Rescue Buttons

[EN] "Last Resort Buttons" - A credit card sized card with spare buttons that can be carried in a wallet. The card contains three different sizes of buttons. [CZ] „Knoflíky poslední záchrany“ – Kartička o rozměrech kreditní karty s…

3D Sets Mini 4×4: Rescuer Switch Holder

Switch holder that fits perfectly to the QuicRun 1060 V2 60A (and probably also its clones) and ensures a reliable attachment without unnecessary stress on parts.

The SELF-SEWING rescue Button printed w/ TPU

This button can be mounted without using any thread or tools. It's all printed in one piece from TPU. Button diameter 15mm, 20mm and 25mm It works without best with coarse fabrics (knitwear etc.). If used with tighter fabrics use a pointy…

Paw Patrol - Marshall Rise & Rescue water ammo

print with PLA, 0,2mm layer, supports necessary, needs some postprocessing with sandpaper

Rescue my Drums

I created this sign from a photo for my son who is a drummer.

Rescue sled for Bruder Snowmobile

One of my boys wanted a resque sled for his Bruder Snowmoibile so I did this the evening before his birthday. The screws needed for assemble are 2x M4x10 with nuts. I printed this one with Petg, 0,2mm layerheight.

Function rescue device Holmatro/Funkční vyprošťovací zařízení Holmatro

Insert one M6 nut into the black bottom of the model and solder it into the part, push the whole bottom through the orange part and seal the black part with an orange ring to prevent the black bottom from falling out. Insert the M6x70…

Dummy 13 Rescue Saw

In my latest addition to my line of breaching equipment for your Dummy, please enjoy the breaching/rescue saw. Stubborn, barricaded door? No match. Trapped victim in a car wreck? No match. Need to cut open a roof to rescue someone trapped…

Power Rangers Lightspeed Rescue Badge - No AMS or MMU!

LIGHTSPEED! RESCUE! Made the Lightspeed Rescue logo badge in Autodesk Fusion (360). The gold base and blue logo are split for easy two-color printing over two separate plates — no AMS needed. The blue logo press-fits into the base. I’ve…

Dog Rescue Love – NFC Keychain Set

🐾 Rescue Love – NFC Keychain Set Show your love for rescue pets with this trio of layered round keychains designed for proud pet parents and animal advocates alike. Featuring three heartfelt sayings—“Adopt Don’t Shop,” “My Kids Have…

Rocket model altimeter and rescue beeper

User interface of the altimeter is implemented in HTML and accessed through the device’s Wi-Fi captive portal. After turning it on, the LED lights up for ten seconds while the altimeter captures the base altitude. Then, place the…

LEGO DUPLO Compatiple Rescue Boat

I designed a Duplo compatible rescue boat for my daughter, and I’d like to share it here. I also created a matching jet ski. If you’re interested in that as well, just let me know in the comments and I can upload it, too. The rescue boat…

LEGO DUPLO compatible Rescue Helicopter

A simple and fun helicopter designed to be fully compatible with LEGO DUPLO bricks. Perfect for young builders who love aviation! The model snaps securely onto DUPLO studs and can be combined with other DUPLO creations for imaginative…

3D sets Mini4x4 Rescuer - axle seal / clearance delimiter

Recommended to use brim - contact surface is very tiny

Animal Rescue Team Board Game Minimal Insert

An easy organization for the pawns and tokens to shrink down setup and get to playing and packing up faster. The cardboard insert works mostly fine, so I figured I'd use that.

Hand Tool Rescue Wrench Skadis Holder

Check out the original model for the link to the youtube channel. I remixed it to use with Ikea Skadis Plates.

Megami Device Rescue Joints by PoofyBird REUPLOAD

This is a re-upload of the three Megami Device Rescue Joint file sets made by PoofybirdDesign for Waist, Neck, Chest, and Shoulder joints. I have not personally made these files, so I cannot answer any questions on them, I am just trying…

TF2 Rescue Ranger (Nerf silly shell blaster)

If you want to buy me a coffee :) https://buymeacoffee.com/methanejuice This uses the Breacher + Preacher kit, plus some additional HW on the Rescue Ranger extension: M4 x 20mm SHSC QTY 2 M3 x 12mm SHSC QTY 1 M3 heatset inserts QTY 2 #4…

International Rescue Logo Keychain

Quick little kechain from the show Thunderbirds. It's the logo for International Rescue. Because this needs to be a multi-color print, it doesn't work with just the STL file, so I didn't upload that. I made it with Bambu Slicer and don't…

Paw Patrol Rescue Wheels Chase Power Haulin Cruiser Projectile Ball Net (2 Variants)

With this model, Adventure Bay is safer now with this replacement projectile for Chase's Power Haulin Cruiser. I found a few other projectiles online but I could not find the "ball net" so I made my own. It might not be exactly the same…

Ozone F*Race 2 rescue handle support

Print using TPU 3 outer layers and 10% infill, you can can easily adjust in the slicer to allow different reserve shapes.

Rescue Annie "Lung"

This model was requested a few years ago by someone to help recreate a part that was discontinued. This is to hold the bags that is meant to imitate the lungs of a CPR doll. It is a very edge use case but if someone needs it I want it out…

You Rescued My Love

Can be printed with anything and rescaled at the slicer. There is a hole at the wench and the top of the crane so the life raft can be secured with a sewing thread.

Sombrero for Figurines (Failed Print Rescue)

This cheerful sombrero was designed to rescue a failed panda print. Instead of tossing the print due to a mistake on top, this hat covers it up and gives it a festive second life! Print details: Supports: Use Organic/Tree supports for the…

Airport Rescue Vehicle Set (42068-1)

This is the Airport Rescue Vehicle set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's…

Rescue Rangers Monterey Jack Cartoon Figurine

Bring home the biggest cheese lover from the Rescue Rangers crew. This model captures Monterey Jack in his iconic outfit. He’s wearing his sturdy tan trench coat and his signature pilot’s cap, looking ready for an adventure—or more…

ADAC Rescue Helicopter

ADAC Rescue Helicopter

Canadian Rescue Helicopter

Canadian Rescue Helicopter

Boat rescue

Use infill you can use supports but will need cleaning up

boat rescue v2

Use infill I used https://www.printables.com/model/1648762-dummy-prusament-spool-for-makers

Playmobil Rescue Helicopter Tail Rotor

My niece and nephew's Playmobil rescue helicopter had a broken tail rotor. This part is a snap-on direct replacement. You may have to ream out with an appropriately sized drill bit after printing so it freely spins. Print instructions…

Rescue Your Glue! - Hobby Lobby / Adhesive Guru 4.5oz Emergency Nozzle & Cap

Summary A professional 2-piece replacement set for 4.5oz Adhesive Guru (Hobby Lobby) CA glue bottles. Designed to rescue full bottles when the original nozzle clogs. Engineered for easy printing and perfect fit. Don't throw away that full…

Boat rescue V3

Use infill and supports.

Hostage Rescue Squad wargame 2 mm counter bases and box

These are 2 mm thick counter bases and a storage box/lid for Mike Lambo's Hostage Rescue Squad wargame. These are bases for the orginal counters to the game that can be found here . The numbers after the filename are the number that need…

Rescue Heroes - Geared Pincher Arm

My previous replacement arm parts were designed for FDM printers. This design is intended for resin printers. I had to press fit this together with pliers. I may go back and design a larger drive gear for a thumb to roll open and closed,…

Rescue Heroes - Harpoon and Gripper Hand Attachments

Another man down from the very abused Rescue Hero crew. These toys are old and my kids love them.... so prosthetics are required. This design is rooted in my previous designs. I just added a couple tools since Gil Gripper needs to have…

Rescue Heroes - Buzzsaw Hand Attachment

I had this idea the other day and had to try it out. I got lucky and it worked on the first try! The blade and saw attachment fit together and the blade can be freely spun. My kids love it! I printed this at 80% infill and 0.2 layers. It…

Rescue Heroes - Replacement Tool Hand

I designed these as upgrades to the Rescue Hero Replacement Arm I made. https://www.thingiverse.com/thing:2846026 Instead of re-inserting the original figure's hand, you can install the base Gadget Hand. The tools should all fit…

Rescue Heroes - Replacement Left Forearm

This is a replacement forearm for a Rescue Hero figure (circa 2001). Poor Jack Hammer finally had one rescue too many this past week.... 3 year olds have a way of finding the weaknesses in old toys. I designed this in Solidworks. It took…

Rescue Heroes - Replacement Voice Tech Card (Volcano/Tidal Wave)

I mostly did this to see if I could. Someone gave us this Aircraft carrier toy years ago and we only have one of the original cards that slide in the front. I used pictures from ebay sales and calipers on the card I do have to try this.…

Rescue Bot Insignia NO AMS

These numbers are in inch about four hours on Elegoo C.C.1 Red @ 0.1 Maroon @ 0.15 White @ 0.2 Dark Grey @ 0.25 Light Grey @ 0.3

Critter Rescue Ramp Modified For Smaller Printer

I took Critter Rescue Ramp by DuaneIndeed and straightened out the straps a bit to fit my pool and then separated the second ramp from the lily pad and resized it to 200 x 145 x 27mm to fit my print bed. If I come back to this I'll…

Flash Point: Fire Rescue organizer

A simple organizer that fits in the original cardboard one; no space for expansions, but all that material can be stored under the cardboard organizer. I have an organizer for the dog expansion, but I don't have the expansion itself so I…

Captain Quack Rescue Fire Fighter

Meet Captain Quack Rescue, the bravest firefighter in the pond! Equipped with a helmet, radio, axe and water hose, this fearless duck is always ready to answer the call. Combining heroic spirit with adorable charm, this detailed miniature…

Flash Point Fire Rescue Damage Tracker

Use this tray to track the amount of remaining damage cubes when playing Flash Point Fire Rescue, remove cubes in reading order (left to right, top to bottom) following the arrows to easily see how long the structure will last! Layer:…

Low-Poly Rescue Bear with Brandy Barrel

A fun low-poly polar bear model created as a joke after an Italian friend mistook a massive Maremmano Sheepdog for a polar bear! I added a custom rescue barrel collar to give him full Saint Bernard mountain-rescue vibes. Print Details:…

Search and rescue basket

Search and rescue basket in 1:48 scale for the fellow modelers

CICO Rescue Cricothyroidotomy Trainer V2

This is a modified version of the "CICO Rescue Cricothyroidotomy Trainer - Vortex Approach" by drandybuck... https://www.thingiverse.com/thing:2530474 As per my comments in the original part, I've modified it to make it easier to print...…

RESCUE CAT token yugioh

HELLO! This is a rescue cat token for yu-gi-oh duel.

Pepper Pots Inspired Rescue Helmet

Pepper Pots Inspired Rescue Helmet Enjoy Category: 3D Printing

Toilet Paper Roll Rescue

Tired of flat, smashed toilet paper rolls that don't actually “roll” on the rod? Me too! I fixed the problem with this simple print. Just get the smashed roll as round as you can and insert the Toilet Paper Roll Rescue and it will remain…

Last_Rescue_Buttons

Last_Rescue_Buttons

Rescue Tool sling cutter

Test version of rescue tool cutter. 1st - make the blade from any steel u like from dxf. 2nd - print 2 handels and cover (u can use any plastic u want) 3rd - sharpen the edge by any tool. 4th - assemble

DLRG Gurtretter - Rescue Tube

Deutsch: Ich habe für unseren OV Schlüsselanhänger in der Form der Gurtretter designet. Ich habe ein Modell ohne Branding und eines mit "DLRG" & "RESCUE TUBE" als Aufschrift (wie im Orginal) hochgeladen. Für meinen OV habe ich statt…

Rescue Boat

inflatable boat

Bambu Lab spool holder rescue

The original Bambu Lab spool holder is such a pretty piece of metal I couldn't bear to put it away in a drawer forever since it goes to the worst possible place on the machine… So, I gave it some feet :) You will need 2 M3x10 or 12.…

Bambu Lab spool holder rescue remix

Updated Nov 3rd: Made the connection between the struts and the base thicker and wider. Changed the orientation of the STL to print on its back. Updated Sept. 8th: Moved threaded inserts to the back side of the stand for better strength.…

Rescue Tow Boat

I loosely modeled this rescue / tow boat on the Carolina Skiff used by our local lake rescue. It came out a little small so I recommend scaling it up to 150% Print two of the canopy supports.

RJ45 Ethernet Rescue Clip

I was inspired by the many designs for RJ45 repair clips, but they all suffered the same issue - the retainer part was bulky, fragile and never fitted my oddball collection of cables. They also required supports. The cable tie method fits…