inflatable rescue boat coastguard
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
simplified model of an inflatable coastguard rescue boat, perfect as a toy for your kid
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 131
- Makes
- 0
- Views
- 344
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Public Domain
The original model is great, i just simplified it a bit to make it more robust for my little daughter as a toy.
I printed the boat on my Sovol SV06 Plus with the following settings:
Material: PETG from Sunlu in Sakura Pink
Nozzle-Temp: 245°C
Bed-Temp: 80°C
Support: Yes (Normal, no tree)
Nozzle: 0,4mm
Layer Height: 0,2mm
Infill: 20%
Print Speed: 75mm/s
Outer Wall Speed: 50mm/s
Initial Layer Speed: 50mm/s
Fan Speed: 60%
I changed the size and printed it in 150%.
I also printed it in a 45° angle, to reduce support material and improve the bottom surface of the “inflatable” area.
To better "support" it in this position i added a small manual / custom strut or pillar.
Thanks a lot to the creator of the original model.
My daughter loves it.