1 / 5
Wingspan Twigs Nest — Stadium-Shaped Bird's Nest Dice Tray — zdjęcie 1
1 / 5

Wingspan Twigs Nest — Stadium-Shaped Bird's Nest Dice Tray

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Shallow stadium-shaped dice tray for Wingspan (or any board game) shaped like a real woven bird's nest. ~1100 procedural

Ocena
0 / 5
Polubienia
2
Pobrania
37
Wydruki
0
Wyświetlenia
155
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution

A stadium-shaped woven-twig dice tray for Wingspan (or any board game with d6/d8 dice). Sits next to its rectangular sibling the dice nest tray — same twig-bundle aesthetic, but the twigs sweep continuously around an oval/stadium perimeter instead of stopping at four discrete corners, and the inside is a shallow saucer with a textured floor instead of a deep rectangular cup. Looks much more like a real bird's nest.

  • Outer footprint: ~134 × 89 mm (twigs included)

  • Rim opening (interior, top): 110 × 65 mm — comfortably fits a fistful of dice

  • Saucer depth: ~9 mm (shallow on purpose — dice settle but stay visible without leaning over)

  • ~1100 randomized perimeter twigs (per-twig diameter, length, yaw, and tilt all jittered); each is solidly attached to the structural shell — no floating geometry

  • ~800 randomized inner pillars form a textured saucer floor that fades flat-to-floor at the centre and ramps up to a flat rim

  • Prints standing up with the saucer opening at the top — no supports needed

  • Parametric: n_perim_twigs, n_inner_pillars, ix/iy/iz, bowl depth, twig length range — all live at the top of twigs_nest.scad. Override with -D 'ix=130' etc.

Photos: printed in woody-brown PLA, 0.2 mm layer, 3 walls, 15 % infill, no supports. The brown filament reads most nest-like; black or grey work too.

Tagi