Wingspan Twigs Nest — Stadium-Shaped Bird's Nest Dice Tray
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Shallow stadium-shaped dice tray for Wingspan (or any board game) shaped like a real woven bird's nest. ~1100 procedural
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 34
- Makes
- 0
- Views
- 151
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution
A stadium-shaped woven-twig dice tray for Wingspan (or any board game with d6/d8 dice). Sits next to its rectangular sibling the dice nest tray — same twig-bundle aesthetic, but the twigs sweep continuously around an oval/stadium perimeter instead of stopping at four discrete corners, and the inside is a shallow saucer with a textured floor instead of a deep rectangular cup. Looks much more like a real bird's nest.
Outer footprint: ~134 × 89 mm (twigs included)
Rim opening (interior, top): 110 × 65 mm — comfortably fits a fistful of dice
Saucer depth: ~9 mm (shallow on purpose — dice settle but stay visible without leaning over)
~1100 randomized perimeter twigs (per-twig diameter, length, yaw, and tilt all jittered); each is solidly attached to the structural shell — no floating geometry
~800 randomized inner pillars form a textured saucer floor that fades flat-to-floor at the centre and ramps up to a flat rim
Prints standing up with the saucer opening at the top — no supports needed
Parametric:
n_perim_twigs,n_inner_pillars,ix/iy/iz, bowl depth, twig length range — all live at the top oftwigs_nest.scad. Override with-D 'ix=130'etc.
Photos: printed in woody-brown PLA, 0.2 mm layer, 3 walls, 15 % infill, no supports. The brown filament reads most nest-like; black or grey work too.
