Vertical Bokken Stand — 4-Part Print, No Hardware | STEP File Included
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A clean, stable vertical stand for displaying your bokken.
- Ocena
- 0 / 5
- Polubienia
- 0
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Standard Digital File License
A clean, stable vertical stand for displaying your bokken. Designed from scratch because nothing available fit the bill — this one does.
Prints in 4 parts that assemble easily with no hardware. Gluing is optional but recommended for permanent display. Stable enough to hold a full-weight bokken without tipping.
What fits: Hook opening is 26mm tall with a 26mm diameter circle (R13). Fits standard bokken tsuba. Does not fit a sheathed katana — check the included technical drawing before purchasing.
Included files:
4x print-ready STL parts
STEP file for modifications
Technical drawing of hook and base plate for fit verification
Print Settings:
Material: PLA (PETG recommended for added strength)
Walls: 3
Infill: 20% Cubic
Supports: No
Layer height: 0.2mm
Assembly notes: Parts press-fit together. Glue for permanent use. Rubber feet on the base are strongly recommended — not included but any standard adhesive feet work.