Vertical Bokken Stand — 4-Part Print, No Hardware | STEP File Included
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A clean, stable vertical stand for displaying your bokken.
- Rating
- 0 / 5
- Likes
- 0
- Makes
- 0
- Views
- 22
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Standard Digital File License
A clean, stable vertical stand for displaying your bokken. Designed from scratch because nothing available fit the bill — this one does.
Prints in 4 parts that assemble easily with no hardware. Gluing is optional but recommended for permanent display. Stable enough to hold a full-weight bokken without tipping.
What fits: Hook opening is 26mm tall with a 26mm diameter circle (R13). Fits standard bokken tsuba. Does not fit a sheathed katana — check the included technical drawing before purchasing.
Included files:
4x print-ready STL parts
STEP file for modifications
Technical drawing of hook and base plate for fit verification
Print Settings:
Material: PLA (PETG recommended for added strength)
Walls: 3
Infill: 20% Cubic
Supports: No
Layer height: 0.2mm
Assembly notes: Parts press-fit together. Glue for permanent use. Rubber feet on the base are strongly recommended — not included but any standard adhesive feet work.