1 / 2
50 mL and 15 mL Tube Rack remix 8x3 — zdjęcie 1
1 / 2

50 mL and 15 mL Tube Rack remix 8x3

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Rack for 50 and 15 mL tubes in an 8x3 pattern with added dovetails so you don't have to glue the rack together.

Ocena
0 / 5
Polubienia
2
Pobrania
38
Wydruki
0
Wyświetlenia
159
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A rack that holds 50 and 15 mL tubes. There is space for 24 50-mL tubes in an 8x3 pattern and 21 15-mL tubes in a 7x3 pattern. 

Printing Directions

Printed in PETG, which is resistant to a lot of chemicals. Print all pieces with the solid part flat on the bed, no supports needed. I'm printing on the Prusa XL, other printers might not be able to fit the racks. Print 2 side supports without mirroring, then put them on the racks in opposite directions. No glue necessary, makes it nice and flat for storage. 

For Assembly

Slide the top and bottom racks into one side support, then slide the other side support on in the opposite direction. 

Tagi