1 / 10
Garage Door Sensor Hinge for Ikea Myggbett - Print In Place
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Convert the Ikea Myggbett door/window sensor for use as a garage door sensor
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 240
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
A simple print in place hinge to use the Ikea Myggbett door/window sensor as a garage door sensor. Other than a couple strips of double sided tape, no extra hardware is required.
The sensor clips onto the hinge, so the original base is no longer needed.
Tolerances may be tight depending on your printer and choice of filament. Add more infill as necessary to get the desired weight so gravity can pull the hinge down when the garage door is open. I used 25% gyroid infill with PETG filament.