Seele-08 Sovol SV08 Gantry
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gantry for Sovol SV08, using stock extrusions and modified monolith belt path.
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 676
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Go to my linked github to download CAD as instructions!
https://github.com/gqvin/Seele-08
Gantry for Sovol SV08, using stock extrusions and modified monolith belt path.
Uses a modified Monolith belt path by CloakedWayne.
Benefits:
Shorter belt path compared to stock (Higher Accelerations!)
Lighter Gantry Parts
Entirely pinned
Double Shear (With Long Shaft Motors)
Better Tensioner Design
Only 3mm X loss and 2mm Y loss with stock toolhead (Reaches stock nozzle brush!)
No new rails, extrusions, or belts needed!
Better compatability with toolheads that mount probe under the X extrusion
No need for dehubbed pulleys
BOM:
Part | Qty | Store/Notes |
|---|---|---|
Pin M5x30mm | 10 | |
Pin M5x22mm | 2 | |
GT2 20T 6mm Idler | 6 | At least 2 have to be genuine gates (the two in AB mounts) |
F695 Bearing | 18 | Can also harvest 8 smooth idlers off of stock gantry and only buy 2 |
10x5x1mm Shim | 10 | |
10x5x0.5mm Shim | 12 | |
GT2 20T 6mm Pulley | 2 | |
Long Shaft Motors | 2 | Recommended LDO 42STH48 - 2504 |
M3 Hardware | n/a | Heat Sets, SHCS |
M4 Hardware | n/a | BHCS/SHCS, Nuts |
Printing:
Standard Voron Settings (4 Walls, 5 Top/Bottom Layers, 40% Gyroid/TMPS-D)
Front Idlers need supports.
Reaming for the pins may be needed.
It is recommended to print Z-Belt Helpers by Nadir as you will be swapping out the Z joints.
If you are reusing the stock toolhead, print the belt clips from this repository.
You need to print some sort of Z-Chain Relocation mod. I recommend and used these.
Acknowledgement:
CloakedWayne for designing the original belt path that this gantry uses.
Future Goals:
9mm Belt Support
AWD Support
Support for 2wd with stock motors
Changes:
2wd 6mm release
Stronger 2WD Idlers
Changed tolerances significantly and allowed for more standard screw lengths