Seele-08 Sovol SV08 Gantry
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gantry for Sovol SV08, using stock extrusions and modified monolith belt path.
- Rating
- 0 / 5
- Likes
- 31
- Downloads
- 42
- Makes
- 0
- Views
- 684
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Go to my linked github to download CAD as instructions!
https://github.com/gqvin/Seele-08
Gantry for Sovol SV08, using stock extrusions and modified monolith belt path.
Uses a modified Monolith belt path by CloakedWayne.
Benefits:
Shorter belt path compared to stock (Higher Accelerations!)
Lighter Gantry Parts
Entirely pinned
Double Shear (With Long Shaft Motors)
Better Tensioner Design
Only 3mm X loss and 2mm Y loss with stock toolhead (Reaches stock nozzle brush!)
No new rails, extrusions, or belts needed!
Better compatability with toolheads that mount probe under the X extrusion
No need for dehubbed pulleys
BOM:
Part | Qty | Store/Notes |
|---|---|---|
Pin M5x30mm | 10 | |
Pin M5x22mm | 2 | |
GT2 20T 6mm Idler | 6 | At least 2 have to be genuine gates (the two in AB mounts) |
F695 Bearing | 18 | Can also harvest 8 smooth idlers off of stock gantry and only buy 2 |
10x5x1mm Shim | 10 | |
10x5x0.5mm Shim | 12 | |
GT2 20T 6mm Pulley | 2 | |
Long Shaft Motors | 2 | Recommended LDO 42STH48 - 2504 |
M3 Hardware | n/a | Heat Sets, SHCS |
M4 Hardware | n/a | BHCS/SHCS, Nuts |
Printing:
Standard Voron Settings (4 Walls, 5 Top/Bottom Layers, 40% Gyroid/TMPS-D)
Front Idlers need supports.
Reaming for the pins may be needed.
It is recommended to print Z-Belt Helpers by Nadir as you will be swapping out the Z joints.
If you are reusing the stock toolhead, print the belt clips from this repository.
You need to print some sort of Z-Chain Relocation mod. I recommend and used these.
Acknowledgement:
CloakedWayne for designing the original belt path that this gantry uses.
Future Goals:
9mm Belt Support
AWD Support
Support for 2wd with stock motors
Changes:
2wd 6mm release
Stronger 2WD Idlers
Changed tolerances significantly and allowed for more standard screw lengths