Counting matching models…
Please before attempting to print this files. Print the Tolerance test from Orca slicer and be sure you can go up to 1, or the one we have made Here you can download the Toolhead for this Project that is the same for SV06 and SV06 Plus…
A gantry plate for 3 roller wheels that fits on a 40mm wide v-slot aluminum extrusion. For a full assembly you need: 3 roller wheels with 24mm diameter 1 eccentric nut ID 5mm that fits in a 7mm hole 2 spacers ID 5mm 3 fasteners M5x28 or…
A simple tool I've designed to align gantry of my bed slingers. Used for Ender 3, Artillery Sidewinder X4 Plus and so on. Print two pieces.
A new belt tension system for the single motor dual z axis gantry lift system I created. Two 3D model parts printed and put together with 4 Dragon 608 flanged bearings. Mounts to inside and outside of the 3030 frame with M4 screws and…
Remix of the classic pen lift to fit on a 20 mm v-slot gantry plate. Apart from this the tool holder has been made to accomodate a metal pen holder ( source - 30 mm hole spacing), which is also adjustable in angle (the top hole is tapered…
Fully 3D printed Gantry for the SV08 MAX Note you can use this also with the stock motors but you will not put the extra bearings to support the shaft! ✅ What’s New This is the double shear variant of the SV08 MAX Front-access belt…
A remixed webcam mount with a perfect view of the nozzle.
Background Since JLCMC was my only alternative to AliExpress to order the right sized shafts at a reasonable price, I ordered the whole parts package there to reduce costs. The toothed Idlers fit fine but the smooth ones didn't fit at…
Compatibility: V Core 3 and 3.1 (MFBS hybrid upgrade) V-Core 3.2h (Rat Rig's hybrid upgrade) V-Core 4 V-Core 4 hybrid OneBox and Enclosure 2 All Ultralight print heads. Current Ultralight print heads released: Bare template, for tool…
To proof, if a expensive rail mod is worth the upgrade, this is a minimal-invasive mod. i wanted the cheaper MGN12H carriage but it not fit between the v-slot holes. So, MGN12C is the way. Use M4x6.5 thread inserts and M4x10 screws. if a…
I made this remix to install this cheap camera from Aliexpress. This camera has a 130º aperture, which makes it easy to attach to the Voron 2.4 gantry. Link to the product on Aliexpress: https://pt.aliexpress.com/item/1005007989879227.html
Side mount adapters for Orbitor and Hextrudort for VZBOT printers or VORON printers running VZBOT style gantry.
Remixed (rebuilt) Voron 2.4 z-chain relocation mod w/thermistor mount from 2-hole IGUS to 3-hole generic chain mount.
I’ve redesigned this build to use 9mm belts, and lower the x-gantry. So you will loose about 10mm in the build hight. But now you will be allowed to use other stepper motors with shaft in 22mm lenght and the original idlers with…
There are plenty of nozzle wipers for CoreOne. But most of them are attached to the bed. So you can only use them for the first (few) layers. This one is mounted on the front left Y-bar holder. So you can use it for any layer. It uses a…
Bracket for mounting extruder motor on moving gantry of the Ender 3 Pro. This braket allows for additional wiring accessories to be routed or zip tied directly to it. There is a gap on the left bottom mount for the additional self…
***UPDATE*** These parts are for the V1. Edgar has updated the design to address these issues in V2. Edgar has a great design here, but I ran into a number of issues with it when the parts were printed. Notably, the holes for the stepper…
The RatRig VCore 3.2H XY Joiner comes with the VSlots on the model - I have a lightweight gantry that doesn't have VSlots - so I've remixed the official model from RatRig and removed the VSlots - fits most Lightweight Gantries. My gantry…
UPDATE V5 - Added RIGHT Brace to support Logitech Cams - Brio100, C270, etc UPDATE V4 - RaspiCam Case - Added one more version that is flipped 180 degrees to have slightly more height - 5mm approx and added a ribbon guide UPDATE V3 - for…
Made the tool taller to 10mm to work better with the 11mm wide idler pulleys that uses the GT15 9mm wide belt on the QIDI Plus 4. Also removed the PRUSA Printer script and added the QIDI wording & logo to the tool handles. Printed in…
The original top brackets did not fit properly (likely due to a different printer or LED bar revision), so I designed new ones that are wider and fit perfectly. You will need 2 x M5 nuts to slip fit inside the brackets for mounting the…
A clip-on filament guide designed to mount on the top part of the printer gantry . No mounting hardware is required — the base is shaped to fit tightly over the gantry casting and is secured in place by integrated rear locking tabs . The…
I was looking to upgrade my Voron LDO Rev D Trident with an A4T toolhead, Xol carriage, and Beacon probe. I did not want to go sensorless for the X/Y as the switches have been reliable so far, but quickly discovered the new…
CHECK OUT MY NEWER AND PROPER VERSION HERE ! PARTS NOT TESTED all parts got "taller" for the additional height needed for the bigger belts - so not modified in bot directions to keep the belts kinda centered i'm working on a proper mod…
update 6/1/2026 - the more rigid ab mounts seemed to have resolved the x beam racking, however... unfortunately when i had first caded this up, i made some of the holes on the o.g motor and front mounts a little oversized. initially this…
simple parts tray to organize the numerous screws when taking apart the Ender-5Max gantry. 8 bins for screws and larger area for the tools. Printed mine in white to contrast the mostly black screws to make them easier to see. (Started…
I Modified AT Brush Mount to work with Stock SV08 with no bed height adjustment. Works great and both versions I remixed and uploaded will work with a beacon/Cartographer set up. The deep version I uploaded is for someone wants the…
[Ultra-Rigid Hybrid Gantry for 500-class Large-Format Printers] This design is a specialized evolution of the Dual Rail Gantry originally seen in the Rat Rig V-Core 3.1, now fully optimized for compatibility with the V-Core 4.0+…
This version of my Full Frontal Gantry XY hjoiners are designed to be SLM printed and are for use in my Rat Rig V-Core 3 and 3.1 hybrid upgrade kit that can be found at the following link:…
These are only Gantry parts for K1 series conversion to Dragonburner, additional modifications to heatbed and tophat may and most likely will be required. (Tested on Creality K1C model) In case you are only interested in X-Rail only…
Hardware used for my install 2x M4x12 bolts 1x M4x20 bolt(I had a power outage and the print quality was mid-poor, ended up using a longer bolt to run into the hole) 3x M4 nuts The allen key size for the screen is 2.0, M4 also 2.0 This…
SV08 Goose Belt Purger System adaption mod to allow for Gantry Purging and nozzle wiping with no z movements needed when color changing. This mod allows for fitting the GBP (Goose Belt Purger) to the SV08 with the minimal amount of bed/Z…
Complete gantry and Toolhead for the Qidi X-Max 3. These should be printable as-is, but do so at your own risk. Feel free to make mods, toolheads, whatever!
This is a Ratrig Hybrid 6WD front gantry designed for the INDX XY motion system. To reduce Y-axis losses that were present in the previous 6WD design, the installation direction of the Y tensioner has been reversed. The front motor mount…
Basic mount for a 28x28mm M2-mounted camera on the Centauri Carbon gantry bearing carriage. May contain affiliate links. Using these links helps to support the creator of this model.
I created a PTFE-Dock for the Kobra X to clipse the on Gantry when the Spools are seperated from the Printer. It can be used on both Sides. The Printhead has enough space to print Models to max height without colliding with the Dock. It…
Go to my linked github to download CAD as instructions! https://github.com/gqvin/Seele-08 Gantry for Sovol SV08, using stock extrusions and modified monolith belt path. Uses a modified Monolith belt path by CloakedWayne. Benefits: Shorter…
TopsCNC Heavy alternate gantry. This was made to use an Amazon linear actuator and have the ability to tram the Z axis. THIS IS A WORK IN PROGRESS..... You may need to make adjustments to aid in the fit or functionof the parts. Print…
Here's a mounting bracket for the Ender 3 Max Neo top gantry I wasn't able to find one that fit right for the Max Neo online, so I figured I would make one that fits perfectly. For me, I decided to pick up a cheap light bar from Amazon…
“The Rook” This is a Quick way to check your X-Axis Gantry is parallel with bed. And adjust Z-Axis rods to get them back in sync. The Rook was designed to be a quick and easy way to get your gantry back parallel to bed when it's knocked…
Due to new motor mounts design, this mod cannot be compatible with Rook 2020 MK2 without loosing print area/modded motor mounts and bed position Printable without supports. Print orientation shown on the last picture. Added cutouts to…
UPD: JAN - added models without led bar, without screen (for regular and hidden bolts) Hello community! Like many of you, I was shocked by the weakness of the frame and made some attempts to fix it. Adding dampers under the printer -…
Please provide feedback. I originally printed this in PETG with a .3mm layer height.
Print two and place on either side of the gantry to hold it level while you fix the gantry in place. use to check if the gantry has shifted or to hold the gantry while you work on the printhead. When using place the tools on either side…
Aligning the gantry by putting some objects between the gantry and the bed causea problems because after the bed tram the gantry is again out of level. So it is better to fix the gantry to the ground qnd leveling or meahing the bed is…
Vitalii CNC Aluminum Gantry Z-Chain/Endstop Mount/PG 12 gland
Maturity: Very good. 2 prototypes. In use since 2022/10. Pillar standoff for gantry maintenance or first assembly on Voron 2.4. Avoid to add some zip ties to level the gantry. Easy assembly on the rail carriers. Notice the upper cut for…
This is an x-gantry camera mount for the Creality Nebula Camera for Ender 3 and Ender 3 Pro. I was able to friction fit the camera, but I would recommend using a ¼"-20 x ¼" machine screw should work. It does not hit the control box for me…
This is direct replacement for Neptune 2 / 2s to fit aliexpress high flow hotend , it does not fit standard ender 3 / micro swiss hotend! In order to install this mod you'll need some hardware, recommended settings and some tips Hardware…
Tight Fit X Gantry Dial Indicator Holder must be glued!
Tight Fit X Gantry Dial Indicator Holder must be glued!
I made this little clip for extra support for the original Side Spool Holder since without it it tends to bend after a couple weeks. Works with: https://www.printables.com/model/776235-ender-3-v3-seke-side-spool-holder-less-gantry-wobb…
I added a hexagon Multicolor pattern to the stock Voron V2.4R2 Parts. I recommend using the 3mf file for assembled multicolor parts & prepainted colored voron logos. Included parts: Idler | left & right XY Joints | upper & lower | left &…
The part “Gantry mount - Angry eyes” has the eyelids as an MMU part.
Instead of a foil surface for the parking, this uses a folded piece of silicone next to the Bambu brush, inspired by Esoterical's nozzle park mod. Use this with the fittings from the original (there is a remix out there for UHF hotends as…
This front/rear gantry support brace uses M6 rods, and is designed to be used with the bottom brace from this gantry support , which uses M10 rods. This creates a compatibility problem. This is adapter allows M6 rods to be used for the…
I designed a chain element to connect to the gantry connector because I didn't figure out how this was done in the original design. Fix it to the gantry connector with M3x8 screws and nuts. Here the link to the original design:…
I just rotated the nut hole 30 degrees for easier printing
Unchanged and added for the kit: higher_tensioner_spacer, interbearing-washer, lower_tensioner_spacer. The X-axis carriage is based on a CAD model from Henlor -https://makerworld.com/en/models/171995 The X-axis carriage with an oval hole…
This tool is meant to help you align the x gantry of your Elegoo Neptune 4 Plus. I dirty remixed @JungleG1337_290793 's design and removed a small section to fit the screw next to the x gantry. Original was for the Max and didn't sit…
MP Select Mini Gantry Support This is a remix of the support pylon for FDM_Guru 's excellent X Gantry Support System for the Monoprice Select Mini 3D printer. It appears that there are now variations in different releases of this printer,…
LowRider v4 CNC - Tie Downs to secure 24v Power Supply (AC-DC) to lower strut plate of gantry. This is the 24v power supply I purchased from Ryan at v1e.com … Print as oriented. No supported needed. I pre-drilled and used M3 screws, but…
I had to shorten the Dragonburner X-carriage mount after switching to Nadir's printed gantry parts. The original Dragonburner X-carriage mount was slightly too long, preventing the printer from homing correctly. So, here's the modified,…
Prusa/PulseXE/Clone Single Motor Gantry Lift [Updated 7-03-2025] New Z axis belt tensioner https://www.printables.com/model/1343663-pulse-xe-dual-gantry-belt-tensioner Please leave a “Like” it helps me, Thank you! The Problem: Z – axis…
Nozzle wipe system that uses a wire brush to wipe the nozzle on tool change, sits between the nozzle homing spot and the bed so you get a good brushing on the way over. Compatible with beacon (wire brush will reset your beacon, trust me…
I doubt anyone else will need this but there's a chance. This is the part of the stock X gantry that the belt attaches to. I received a printer in pieces that was missing this part, so I created it roughly following the original shape.…
This is for a 5015 fan on the linear rail gantry by BootyCallJones. Because of the size of a 5015 blower, it's really difficult to get it to fit without limiting the travel of your printhead. This cooler fits with a minor modification:…
This is for a 5015 fan on the stock K1. Because of the size of a 5015 blower, it's really difficult to get it to fit without limiting the travel of your printhead. This cooler fits with a minor modification: YOU MUST REMOVE THE CANBUS…
Remix of nice phone holder for M5C. My print came out fantastic using Elegoo PETG Pro with 15% crosshatch fill. Suggest laying on it's right side for printing. .15mm came out nice and smooth for me, but likely should work well at anything…
This front/rear gantry support brace uses M6 rods, and is designed to be used with the bottom brace from this gantry support , which uses M10 rods. This creates a compatibility problem. I have modified the bottom mounts to use M6 rods, so…
These are the X gantry parts for the ModMax upgrade if you're using the FYSETC lightweight gantry for the Zero G Mercury One for the Ender 5. Updated - 31st Dec 2024: Added new versions of the top sections for more linear rail clearance…
This is unofficial, not needed for a functional LowRider 4, and offers primarily cosmetic (aesthetic) benefit (for the most part; the “tie downs” do have some zip tie slots that could be used to help with wrangling wires, and the back…
Later Edit: 25 November 2024 I just realize that i forgot to add the Z strain Relief that attaches to the the X stepper motor holder! Please before attempting to print this files. Print the Tolerance test from Orca slicer and be sure you…
File modified to fit X3 PRO. It allows you to eliminate the problem of vibrations caused by the filament spool.
This is a remix of the V-Core 3.1 to include the V-Core 4's Hybrid Gantry kinematics with support for various configurations. Originally this started as solely a mod to MFBS's Gantry to support dual linear gantry, however in conversation…
I wanted to mount my umbilical to my gantry. It seemed like the best way to minimize its run length and avoid getting it caught in my z-chain. I couldn't find an existing STL, so I hacked this together. It's not a work of beauty, but it's…
Please before attempting to print this files. Print the Tolerance test from Orca slicer and be sure you can go up to 1, or the one we have made Here you can download the Toolhead for this Project that is the same for SV06 and SV06 Plus…
This is a modified version of the of the AB Stepper Holder that CN3D release. For easier printing. I split the lower section heated insert section to be a separate section. This allows the lower to be printed without any supports and have…
This is a modified version of the X beam holders that CN3D released for their SV08 3D gantry. I had clearance issues with the stock tool head hitting these when printing edge to edge. I also had clearance issues with the top hitting the…
This is the QIDI X-CF Pro left side Gantry mounting bracket. I purchased this printer used with a broken gantry. QIDI did supply me with the original CAD data for the piece but it's a sheet metal part and not appropiate for printing.…
HeroME Gen 5 Gantry adaptor and baseplate for TronXY X5SA Pro(2020) remixed using my own X5SA pro 2020 edition printer to model after. Confirmed that it fits, uses all original screws and the stock ABL sensor(using the…
Gantry crane. Downscaled from N scale. Prints easily and assembled using CA glue.
Redid the top clamp parts (metric) so i can drive the screw using a socket wrench. See the BOM and instructions here: https://www.thingiverse.com/thing:6516352
The Voron 2.4 AWD Gantry introduces a groundbreaking design that sets it apart from other all-wheel-drive (AWD) systems available in the market. Here’s what makes it unique. 1. Shorter Belt Paths for Greater Efficiency: Unlike other…
Revision 1: 2025-11-15 Revise Amazon links per currently available items Reflect Happy Hare's incorporation of Filamentrix's Filament Cutter into its code base Introduction The Voron 2.4R2 with Happy Hare provides a means to cut off the…
The Voron 2.4 AWD Gantry introduces a groundbreaking design that sets it apart from other all-wheel-drive (AWD) systems available in the market. Here’s what makes it unique. 1. Shorter Belt Paths for Greater Efficiency: Unlike other…
The Voron 2.4 AWD Gantry introduces a groundbreaking design that sets it apart from other all-wheel-drive (AWD) systems available in the market. Here’s what makes it unique. 1. Shorter Belt Paths for Greater Efficiency: Unlike other…
This is my work in progress gantry replacement. I have not mounted it yet to test the end stops will be doing so in the next few days and will update with changes as I do so. wanted to provide the file if anybody wanted it as a basis to…
This mount utilizes the 3 mounting points on the Mantis carriage, probably for cable chain. Uses M3x5x4 heat inserts. The mount has 3 holes corresponding to the ones on the gantry. M3x8 SHCS is recommended to mount. A dent was made to…
This is a mount for a bigger MG996R servo for Enraged Rabbit Filametrix. What do you need: - 5 M3 heat inserts - 4 M3 x 16 screws - 1 M3 x 20 screw - 1 M3 nut - 1 M3 x 16 BHCS screw
A gantry plate for 3 roller wheels that fits on a 40mm wide v-slot aluminum extrusion. For a full assembly you need: 3 roller wheels with 24mm diameter 1 eccentric nut ID 5mm that fits in a 7mm hole 2 spacers ID 5mm 3 fasteners M5x28 or…
This is a “fixed” version of the Micron+ R1 XY joints that is compatible with the lightweight CNCed gantry options often found on Aliexpress. These CNCed gantries were designed for the original R0 XY joints, so because the new XY joints…
The Voron 2.4 2WD Gantry introduces a groundbreaking design that sets it apart from other 2WD systems available in the market. Here’s what makes it unique. 1. Shorter Belt Paths for Greater Efficiency: Unlike other systems, the mammoth-3D…
I have one of those t8 style lights with the clips. make sure to mirror the model for the other side.
The mount fits into the right z_bearing block, but you will need longer M5 screws (+1cm). It allows to use all PUG models. You will need to print the modified part with supports. Otherwise print with Voron settings.
The Voron 2.4 AWD Gantry introduces a groundbreaking design that sets it apart from other all-wheel-drive (AWD) systems available in the market. Here’s what makes it unique. 1. Shorter Belt Paths for Greater Efficiency: Unlike other…
I had an empty spot on the right side of my printer and was tired of my blades being scattered in the drawer. This remix allows the holder to be clipped to either side of the gantry of the Ender3 v3 KE. Clip is slightly loose fitting so…
![MP Select Mini X Gantry Support + Camera Mount [Reinforced and Realigned]](https://media.printables.com/media/prints/104933/images/1050470_7bd50778-aa3e-40f4-a1fa-3073ec9c5961/aa03752483e09f37421c28265c134c55_display_large_10.jpg)
![Single Motor Gantry Lift System for the MK3s [Updated]](https://media.printables.com/media/prints/736904de-227e-4caf-9626-0305d7a904b9/images/10148269_133425be-78e8-498d-b18b-cec087883b86_3b32245f-7430-4a55-a482-a5eddc784103/20250702_223537.jpg)
![[unofficial] LowRider v4 DIY CNC, gantry back covers, hinged for opening, and can pop out and back in, plus "tie downs" for them, and an in-gantry Jackpot mount](https://media.printables.com/media/prints/1082723/images/8511977_a5e0de90-94c3-4d5d-bc49-49ef96756aa0_c23e00ce-a752-452e-ad76-fbb7a7535ca4/img_8848.jpeg)
